Race Fairings 2023 S1000RR advice

[Thefridge1980]

Thanks for sharing Looks very nice, exactly what I was considering. Couple of questions, do you think the bellypan would accept being cut to retain the side stand, I do track days on my own and that would be a pain. Re the wings.. That's an interesting one, they are under a lot of force on straights, lastly, did you apply the graphics?

 

[alex]

I considered cutting it for the sidestand convenience. The 'issue' was that the fixture point of the belly pan uses the sidestand attachment point. If these were not painted and I was handy fibreglass then I could well have chopped it up some more and reworked it.

I may take the sidestand and dremel with me to Jerez...

Usually someone will help with getting the bike on a paddock stand if you ask.

 

[alex]

Yes I applied the stickers, badly, 40ft view is best

 

[Ian R]

It looks good. I have ordered a set too.

 

[Thefridge1980]

Yes I applied the stickers, badly, 40ft view is best ha ha, true race bike then, thanks.. I think I'll go with a set of these, would you mind sharing who you got your graphics from?

 

[Thefridge1980]

ha ha, true race bike then, thanks.. I think I'll go with a set of these, would you mind sharing who you got your graphics from?

 

[Ian R]

ha ha, true race bike then, thanks.. I think I'll go with a set of these, would you mind sharing who you got your graphics from?

Just so you are aware, all communication will be in Italian so unless you speak the language you’ll need a translator

 

[alex]

Yeah I used Google Translate.
Matt effect design Stickers https://www.ebay.co.uk/itm/364294573614
Note the fairing don't match the 2023 lines exactly so any fairing sticker kit is not going to match every angle and curve on the bike, i made some edits and didn't use a few bits. I probably wouldn't order an extensive kit again. Too much waste.

And Ratmally for number boards/headlights https://www.ebay.co.uk/itm/203559937983

 

[Thefridge1980]

Yeah I used Google Translate.
Matt effect design Stickers https://www.ebay.co.uk/itm/364294573614
Note the fairing don't match the 2023 lines exactly so any fairing sticker kit is not going to match every angle and curve on the bike, i made some edits and didn't use a few bits. I probably wouldn't order an extensive kit again. Too much waste.

And Ratmally for number boards/headlights https://www.ebay.co.uk/itm/203559937983

Great thank you

 

[TheGodfather]

Looking good Alex.
Regards wings. My motoxcambi ones only went through the FG. I was going to put a plate behind, but thought in the event of an off that could potentially cause more damage. Rather the wings just come off than ripping the side panels out.