SS Akro headers. What else do I need

[bmwbadboy]

Or just buy and replace wheel speed sensor.

 

[alex]

Check the ABS sensor gap to the sensor wheel.

 

[IMORTAL_Indian]

Check the ABS sensor gap to the sensor.

I have not ruched the screw. What is the torque


Sent from my iPhone using Tapatalk

 

[soofsayer]

Take it out and give it a good clean, refit, test. Fingers crossed.

 

[IMORTAL_Indian]

Check the ABS sensor gap to the sensor wheel.

What should the gap be? Just clean with brake cleaner?


Sent from my iPhone using Tapatalk

 

[IMORTAL_Indian]

What should the gap be? Just clean with brake cleaner?


Sent from my iPhone using Tapatalk

https://youtu.be/B4yiFI7fY5s


Sent from my iPhone using Tapatalk

 

[stuartb]

Told you to clean the sensor a few days ago..tut tut Amit ! [emoji87]

Sent from my SM-G975F using Tapatalk

 

[alex]

What should the gap be? Just clean with brake cleaner?


Sent from my iPhone using Tapatalk

~1.4mm...skimming it but not touching

- Alex

 

[IMORTAL_Indian]

Told you to clean the sensor a few days ago..tut tut Amit ! [emoji87]

Sent from my SM-G975F using Tapatalk

I just put a light rag from the outside, not knowing there was a bit that come off and the insides to clean... [emoji2375]


Sent from my iPhone using Tapatalk

 

[GixxerChuck]

Have you managed a run out yet with the exhaust on? How's it running?

 

[IMORTAL_Indian]

Have you managed a run out yet with the exhaust on? How's it running?

Yes, I did a 60 miles round trip yesterday to my mate who has the GS-911 tool.. no issues that I could tell other than the noise increase and the bangs and pops.... delivery seemed very smooth where I could test it, but with dodgy brakes, I was fairly good on the A3, M25 and M40.


Sent from my iPhone using Tapatalk

 

[IMORTAL_Indian]

~1.4mm...skimming it but not touching

- Alex

2 credit cards as per the video.... ??

Not got anything that is that accurate to measure 1.4mm. [emoji2363][emoji2375]. More tools to purchase I guess.


Sent from my iPhone using Tapatalk

 

[alex]

2 credit cards as per the video.... ??

Not got anything that is that accurate to measure 1.4mm. [emoji2363][emoji2375]. More tools to purchase I guess.


Sent from my iPhone using Tapatalk

Judge by eye...i mean its there or there abouts

- Alex

 

[IMORTAL_Indian]

Have you managed a run out yet with the exhaust on? How's it running?

This is what the GS tool reported.

Sent from my iPhone using Tapatalk

 

[bmwbadboy]

This is what the GS tool reported.

Sent from my iPhone using Tapatalk

Did you clear them once ? Have they come back ?

 

[IMORTAL_Indian]

Did you clear them once ? Have they come back ?

Cleared all faults. The only one to come back was the wheel sensor extrapolation.


Sent from my iPhone using Tapatalk

 

[IMORTAL_Indian]

Wow, taken the sensor off as per the video revealed a lot of crap

Sent from my iPhone using Tapatalk

 

[stuartb]

Without doubt that sensor has been brushing the ABS ring, thats where that swarf has came from, if you zoom in on the images you can clearly make out the scuff mark's on the ring, that small semi circular plastic part looks like it came off the plastic shroud/mount of the sensor.

As long as the sensor is picking up all should be OK if you put everything back in place correctly.

The gap on my sensor I would say is about 3-4 mil..

Sent from my SM-G975F using Tapatalk

 

[mike g]

you might need to look at the captive nut in the botttom of the fork leg, apparently it can be positioned incorrectly

 

[GixxerChuck]

I?m guessing the 2 red ones will always show as the server cable has been removed


Sent from my iPhone using Tapatalk