Removing undertray

[user 2637]

Hi guys. Merry Christmas. I hope you and your families had a great Christmas. I know times are difficult at the moment, so I genuinely hope you all had a moment to switch off and enjoy.

I?ve purchased a carbon undertray for my 2020 rr. I?m struggling to remove it, I?m concerned about damaging something, does anyone have any advice or suggestions for any videos on how to remove. Ilmberger don?t supply instructions.

Thanks in advance

 

[alex]

Which bit are you struggling with? These Evotech instructions for fitting their radiator guards (a must have IMO) might help. https://evotech-instructions.s3.eu-...s+1000+rr+radiator+guard+set+instructions.pdf

 

[user 2637]

No, the rear under seat undertray

 

[user 2637]

I?ve removed the pillion seat etc but what bolts drop the undertray

 

[alex]

Oh, sorry, all the bolts are pretty evident back there. If you mean the tray the battery is in, I haven't removed it.

Usual tools are a T25 and plastic trim removal tool to separate clips.

Sent from my SM-S9060 using Tapatalk

 

[user 2637]

I?m just gunna to tear it apart, taking photos as I go. It?s shocking to be fair, the poor fitting instructions that ilmberger supply

 

[lightning_bob]

Do you have the Oem undertray?

 

[fast_ryan]

Removing Undertray

If you want to remove the plastic rear carrier then you need to remove all the trim pieces before you can access it. If you are referring to the undertray (where the ABS pump and battery are located) then you need to remove everything from the back end of the bike including unbolting the regulator and removing the fuel tank.

 

[Wull]

I?ve sent a PM