Led indicators help

[Pedro3178]

Hey guys,

I like to change my indicators on my bikes to led ones , just for look purposes. I haven?t had any issues previously and normally just used resistors to cancel out any warning lights. No matter what I try I can?t get it to work on my 2010 RR . The lights function properly, no fast flashing etc just get the lampF warning . At the moment the led indicators are on with no resistors and work fine except for the warning , if I use the resistor ( will attach picture ) then the leds flash fast. The bike already has led cluster tail lights fitted ( not by me ) . Is there any way to get this to work?

Cheers

Sent from my iPhone using Tapatalk

 

[stuartb]

You can do that for headlights in settings for track purposes, not sure about indicators tho..

Sent from my SM-G998B using Tapatalk

 

[Pedro3178]

You can do that for headlights in settings for track purposes, not sure about indicators tho..

Sent from my SM-G998B using Tapatalk

Cheers Stuart. I ended up just soldering some small 12v bulbs in-line to trick the canbus, all working now but still confused why the resistors didn?t work. All good now anyway.


Sent from my iPhone using Tapatalk

 

[stuartb]

Really lol.. what does that look like..post up a pic..canny beat a crafty move [emoji3]

Sent from my SM-G998B using Tapatalk

 

[Pedro3178]

Really lol.. what does that look like..post up a pic..canny beat a crafty move [emoji3]

Sent from my SM-G998B using Tapatalk

Lol, it?s all back together now, didn?t think of a pic!
Basically I just soldered some wire onto the positive then wire onto the negative of the 12v bulb, rapped this in heatshrink then hot glued to underside of fairing , I then soldered in-line with the new led wiring and the bike connector so you can still disconnect when removing the fairing to work on the bike.

I managed to pick up a GS-911 so cleared faults and double checked, works a treat now with no faults.


Sent from my iPhone using Tapatalk

 

[stuartb]

Pretty decent.. GS 911 is a handy tool ............MR 299 MPH..bet you forgot about that lol..

And by default.. look at the screen below..showing led or lamp style indicators, might just have solved that indicator issue..

Sent from my SM-G998B using Tapatalk

 

[FL4TLINER]

Is there any update on how to remove the lamp error everytime I turn my indicators on,(without soldering 12v bulbs into the wiring) they are Oxford mini led’s, they hyper flash and I have to turn the bike off and on again to remove the (lamp) error from the dash once I’ve used the indicators my mechanic has tried various resistors and hooked it up to diagnostic machine, it’s a 2010 model so the option to remove the error through the menu isn’t available