Locked up

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ozzy

Well-known member
Joined
Jan 13, 2013
Messages
102
Reaction score
4
Location
east yorks
2011 bmw second time my rear pads have locked on to my rear disc, first time three weeks ago , so changed pads not been in a week it?s gone and locked up on me again😡
Happened to any one else plus what?s the reason and how to rectifie it. Next time I might be laid in the road 🙄.
Cheers in advance👍
 
yes it needs quite a lot of slack - if you ride about a mile that should get it nicely warm - then back off the MC rod until it's free 10mm lock nut and 8mm adjuster (or fingers) might need to take heel plate off for easy access (HP rearsets).
a good bleed won't hurt either
 
Cheers lads will have ago - took new pads out piston will not move back in solid.
 
It will go...but the piston could be offline try to give it pressure from different points

- Alex
 
ohh thats bad i can push mine by hand - so it slides and or pushes piston back just by holding caliper (and it still locks)
 
Leave the old pads in an put a flat lever in between the old pads. When you apply pressure it will be more even on the piston. Give the piston a good clean before though.


Sent from my iPhone using Tapatalk
 

Latest posts

Back
Top