CEZAR
Active member
Hi guys, it might sound stupid but how you turning on lean angle?
(Shes still restricted up to 9rpm)
(Shes still restricted up to 9rpm)
lean angle?
- Thread starter CEZAR
- Start date
Help Support S1000RR FORUM:
IMORTAL_Indian
Well-known member
If you go to the set up menu and scroll to equipment you can scroll to bank display on or off. This means the lean angle. If you turn this to on it will then give you the choice of fast, mid or slow.
Page 104 of the manual if you need to refer to it.
Page 104 of the manual if you need to refer to it.
Just to add to this.
Fast, mid or slow is the delay speed in which the current lean angle is displayed.
The panel will display max lean angle achieved for left and right sides. This saved figure resets itself when you turn the ignition off.
(So take a photo before you switch off if you wanted to show someone how big your balls are)
For me I set mine to slow. I tried fast and mid, but buy the time I was out of the corner and looked down it was gone.
I guess I prefer to concentrate on the actual corner then have to quick look when upright and on the straight.
Fast, mid or slow is the delay speed in which the current lean angle is displayed.
The panel will display max lean angle achieved for left and right sides. This saved figure resets itself when you turn the ignition off.
(So take a photo before you switch off if you wanted to show someone how big your balls are)
For me I set mine to slow. I tried fast and mid, but buy the time I was out of the corner and looked down it was gone.
I guess I prefer to concentrate on the actual corner then have to quick look when upright and on the straight.
