HID Kit

[pof]

first one is standard lights, 2nd is the led sides then main the high beam

 

[pof]

then increased the lighting at the rear lol

 

[Flatstick]

Loots good

 

[alex]

The side lights...what's the fitting? W5W?

Did you get the LED's which are for CANBUS? I need to get new bulbs to match my Low Beam HID.

 

[pof]

Hardest bit was finding place for ballasts and getting rid of" bulb out"on dash

 

[pof]

No not canbus leds.

 

[the kickboxer]

So is anybody going to recommend the ones they use. I fitted a 35w 6000 to my dip, the light beam was 2 meters in front of the bike. I made adjustments to the beam height but lost the intensity to one spot, alot of light but no beam. That bike was stolen recently in the Cannons of Braintree break-in, when 11 bikes got taken and I would like to get my replacement HP4 correct. How did peeps remove the on dash warning when fitting LED sidelights? as I would rather know my engine temp than LampF displayed. TIA Glen

 

[alex]

I have a 55w HID hit fitted and it's significantly brighter but I've not tried it on road yet (I'll let you know).
I've also just bought, as a test, Canbus compliant LED sidelights. Again I will fit these and if they work I'll post the details.

 

[pof]

55w 6000k is what i use with slimline ballasts. The leds triggered fault. Go into set up and scroll through , 1 bit says something about surpress light fault (not those exact words but its obvious). Manual says its used so track bikes can take indicators and numberplate light off

 

[GixxerChuck]

I've ordered 35w slimline ballast kit from hids4u (non canbus). They have said wire up and if produces error codes can swap to canbus version. Updates to follow when fitted.

 

[Flatstick]

Hi there

some of the best headlights if have seen were on Mibridger's bike at the Bmw day at donnington. I think he said they were Phillips hid bulbs and led sidelights. Sure he'll be along to give us the correct details if I haven't got this quite and maybe pics.

Cheers

dean

 

[GixxerChuck]

Now fitted. I will do a how to and show the ballast and starter location (this is the hardest part!)
Before

After

Difference in colour (high beam is yellow on left, HID is white on right