Front Paddock Stand.

[JordanP]

Chaps.

Can anyone recommend a good front Paddock stand??

Thanks.


Sent from my iPhone using Tapatalk

 

[IMORTAL_Indian]

I have an Abba Stand that lifts both wheels off the ground??


Sent from my iPhone using Tapatalk

 

[r25sti]

i use the harris pin type, works well, light and compact.

 

[IMORTAL_Indian]

I have an Abba Stand that lifts both wheels off the ground??


Sent from my iPhone using Tapatalk

Oh, did I mention it's for sale.... ? Look in the for sale section


Sent from my iPhone using Tapatalk

 

[Toan the Moan]

I have quite a few types of paddock stands and I find this one to be the best and the cheapest
http://www.ebay.co.uk/itm/FRONT-FOR...hash=item54448d321c:m:mk2jShUWboOoPlktXene-gA

 

[fast_ryan]

Harris Performance

Highly recommended paddock stands and the best I've ever used. They are expensive but they last for years as they are extremely well made.

http://harris-performance.com/acatalog/Online_Catalog_Harris_Paddock_Stands_8.html

 

[Billo01]

I use an ABBA stand to lift the rear and in combo with this a Warrior stand (from Demon T) to lift the front. Warrior stand does the job for me with little expense.

 

[Westy]

After using a Warrior Spider stand on my other bike & having a full ABBA super bike lift stand in the garage its these two that Im using.
Would recommend to anyone however I have only had these for 2 weeks so far - hence why they look immaculate in the photos

The front and rear adjust in milliseconds to accommodate different width sizes of forks and rear paddock bobbins which might be perfect if you want to swap to another bike.

The rear brings the bike up high and clear which would be preferred for tyre changes.

p.s. you can tell Im a 24 graduate reusing carpet :nevreness:. Just need a large barrier rubber matt for under the bike now...

 

[Welsh-boyo]

I'm using warrior aluminium , they have been brilliant and really lightweight.

Sent from my SM-G930F using Tapatalk

 

[Japcati]

View attachment 2353

View attachment 2354

View attachment 2355

After using a Warrior Spider stand on my other bike & having a full ABBA super bike lift stand in the garage its these two that Im using.
Would recommend to anyone however I have only had these for 2 weeks so far - hence why they look immaculate in the photos

The front and rear adjust in milliseconds to accommodate different width sizes of forks and rear paddock bobbins which might be perfect if you want to swap to another bike.

The rear brings the bike up high and clear which would be preferred for tyre changes.

p.s. you can tell Im a 24 graduate reusing carpet :nevreness:. Just need a large barrier rubber matt for under the bike now...

How much and where from?

 

[Westy]

BMW Motorrad Front & Rear set for K46 / S1000RR

Your nearest Motorrad dealer will be able to order them in. I paid ?320 for the set. Impressed with them as I nearly went for Gee-Tech welded stands as my second option (also pricey but very nice to look at)


https://www.rainbowmotorcycles.com/...87/S1000RR+Paddock+Stand+Set+++Front+and+Rear
Hope that helps

 

[Eddie]

I've bought Gee-Tech, can't wait for them to arrive.

Gorgeous to look at, custom made to order (mine will have my name welded on them) but there is a wait list.

 

[Toan the Moan]

Does your wife know how much you paid Westy

 

[Westy]

Does your wife know how much you paid Westy

I'm not married yet or that old cheeky

It's enough but they'll sell well second hand
Plus as above GeeTechs are ?300 & the Motorrad ones adjust to different bobbin and fork width immediately with nice wheels.

I'll list them on here if I ever sell them .. would hope to get something back for them!


Any other stands used? I did make a thread asking for advice a while back and had good feedback from you lads

 

[Eddie]

Harris are good, couple of mate's use 1-Jac which are dead handy and make it very easy to work on front end.

Abba stand is great too but I only use mine in the garage for maintenance, too fiddly to be any use in the pits.

 

[Snow]

I bought a cheap set off ebay. Pair for ?40. Good enough for what i need but the front is sh!t to get the spindle out as the bracket gets in the way

 

[Japcati]

Bought a headstock stand today in my local bike shop here in Dublin 100 euro with 5 different pins.

happy enough with that.

 

[alex]

If you still have the ABS connected, you may find the headstock pin won't go in. Certainly on the Gen2 it was blocked, i believe all variants are the same.


- Sent from Mobile

 

[Japcati]

If you still have the ABS connected, you may find the headstock pin won't go in. Certainly on the Gen2 it was blocked, i believe all variants are the same.


- Sent from Mobile

Ah shyte...you serious??


Ah well,lets hope I can use it on the R1 so.:smile-new::smile-new:

 

[alex]

Yeah sorry. Have a good look before, so you don't force anything.


- Sent from Mobile