stuartb
Well-known member
I've just fitted a tail tidy and it's thrown an error, can I over ride this anywhere guys....
Sent from my SM-G998B using Tapatalk
Sent from my SM-G998B using Tapatalk
Cheers Andy, I've emailed the manufacturer to be sure what I'm buying.. they've a Gen 2 GS 911 which is backward compatible with the corresponding "circular" connector lead listed on their site.. so guessing the original model will work with correct connector .Its a odbc connector as in cars etc?
Thanks for that Ryan.. sent you a WhatsApp btw..If you have the older GS-911 you just need to buy an OBD2 adapter cable.
LED snooker..Does the Gen 4 use a bulb or an LED for the OEM number plate light? It may be that a suitable resistor will clear the error code?
LED snooker..
I believe the draw in the unit I fitted is greater as it has a triple LED cluster hence the error, the OE unit is single from what I can make out..I would say it's easily solved by resorting to a single LED unit or as Ryan says suppressing it via the console... I'm reasonably confidant that this is correct.. I've done a bit of digging over the last day or so, that said I'd happily be corrected on this..
Sent from my SM-G998B using Tapatalk
A resistor might resolve matters, that said I've never known a resistor to be supplied with any tail tidies I've fitted..
I'll hook up one of these single pole LEDs and see if that sorts it out..
Is that for a Gen 4 ?
Sent from my SM-G998B using Tapatalk
Enter your email address to join: