Gen 3 Blipper issue?

[shy231_]

Hi all.....

Last couple of trackdays I've noticed my blipper will sometimes not want to work when at the track.

It takes me attempting a few times to push on the lever before it works and i can go down a gear.

I'm 100% off throttle so its not that.

Is there a known issue on them?

Braking from top gear straights down to 3rd gear corners aren't fun when you cant use engine brake haha

 

[scooby]

sounds like your clutch switch not working/adjusted properly, or excess play in the gear linkage

 

[scooby]

easiest way to tell, remove switch from under clutch lever, put the meatal tab over both arms and tape up tightly so both arms on switch are closed. then tie switch up somwehwere out the way. you'll lose launch control+pit lane limiter ability, but it will show you if it's the switch adjustment or not

 

[alex]

Chain slack and resetting the adaptions were other options that sprung to mind.

 

[shy231_]

thanks gents.....something to try at brands later this month.