Front pinch bolts... where ?

[stuartb]

I remember reading never to undo the rhs as it is lined up for a sensor or whatever

Sent from my SM-G935F using Tapatalk

 

[paul_m]

I used pro bolt stuff once and it's crap. That's my own personal opinion. If you know where to look you can find better stuff for cheaper. But stretch bolts and important stuff. OEM for me all the way.

Sent from my SM-G920F using Tapatalk

 

[paul_m]

I move ours so that it makes it easier to swap the front quicker.

Sent from my SM-G920F using Tapatalk

 

[bananaman]

I move ours so that it makes it easier to swap the front quicker.

Sent from my SM-G920F using Tapatalk

How is it easier buddy? I find it's a handy ledge to hook the wheel on while I locate the axle.

Oh just a mention, the wheel can and fits the wrong way round peeps lol

 

[paul_m]

The width of the wheel just slightly catches the wheel when you chuck it in. I just crack it off and move it possibly 2mm. It just gives a little more wiggle room. Then place it straight onto the spacer and chuck the spindle through. Just ensure there is clearance from the sensor to the speed ring. But that's only an expensive magnet covered in plastic.

Sent from my SM-G920F using Tapatalk

 

[fast_ryan]

OEM Front Fork Pinch Bolts

Hmmmm so OE is the way forward

For bolts like these it's always worth sticking to OEM.

 

[soofsayer]

I used pro bolt stuff once and it's crap. That's my own personal opinion. If you know where to look you can find better stuff for cheaper. But stretch bolts and important stuff. OEM for me all the way.

Pro-bolt appear to supply a number of MotoGP, moto2 and moto3 teams?

https://www.pro-bolt.com/sponsorship/

 

[paul_m]

Yes with multi head titanium. Which everyone else pays for by buying their crap aluminium poor quality control over priced dog ****.

Sent from my SM-G920F using Tapatalk

 

[alex]

The Ali stuff is made of chocolate. I like the Stainless / Titanium parts are much better...and come in black!

 

[soofsayer]

Yes with multi head titanium. Which everyone else pays for by buying their crap aluminium poor quality control over priced dog ****.

Sent from my SM-G920F using Tapatalk

This thread is about front fork pinch bolts for an hp4. I'm pretty sure they don't come in aluminium. Have you used pro-bolt titanium fasteners?

 

[Toan the Moan]

I just used some a2 stainless cap heads off ebay

 

[user 980]

Have used probolt stainless and titanium in the past and been very happy with it. Plan on using black stainless when oem start to weather.


Sent from my iPad using Tapatalk

 

[stuartb]

Hmmm Black Stainless sounds nice.. btw they have a guide to measuring bolts on their site.. I printed it off...its all you will ever need to know about bolts and holes etc lol

Sent from my SM-G935F using Tapatalk