backmarker
New member
- Joined
- Oct 18, 2016
- Messages
- 3
- Reaction score
- 0
Hi Backmarker here,
I have a 13 hp4 standard. I am in Perth Western Australia. I have been adding bits and pieces to the bike for a while now.
HP rear sets, Giles tooling clutch lever, Brembo 19rcs master cylinder, 520 superlight conversion -1+2, brembo z04 pads, 2d front link, hid high and low headlights
I normaly run a pirelli sc1 sc2 combo, have the rear suspension raised with the offset blocks, front forks raised 4 lines, 4 lines showing on the preload and usually run 102 race gas.
I use the bike mostly for track days and a bit of local riding so the set up is focused towards our local track which is short with tight corners so I have set the bike up to give good turn in and early on the power.
I have a 13 hp4 standard. I am in Perth Western Australia. I have been adding bits and pieces to the bike for a while now.
HP rear sets, Giles tooling clutch lever, Brembo 19rcs master cylinder, 520 superlight conversion -1+2, brembo z04 pads, 2d front link, hid high and low headlights
I normaly run a pirelli sc1 sc2 combo, have the rear suspension raised with the offset blocks, front forks raised 4 lines, 4 lines showing on the preload and usually run 102 race gas.
I use the bike mostly for track days and a bit of local riding so the set up is focused towards our local track which is short with tight corners so I have set the bike up to give good turn in and early on the power.