What have you bought for the K67?
- Thread starter JoePeps
- Start date
Help Support S1000RR FORUM:
Re: What have you bought for the gen4?
Looking for a replacement belly pan since removing the CAT. The Akra is purpleing up nicely but need an extended belly pan. Performance Parts is showing one but don't seem to have in stock for the past two months.
Looking for a replacement belly pan since removing the CAT. The Akra is purpleing up nicely but need an extended belly pan. Performance Parts is showing one but don't seem to have in stock for the past two months.
Bikeracer1098
Well-known member
- Joined
- Sep 16, 2019
- Messages
- 211
- Reaction score
- 7
Re: What have you bought for the gen4?
Have you got the full Akrapovic titanium system fitted?
Thinking of getting one fitted to mine prior to collection. What’s your thoughts on it?
Have you got the full Akrapovic titanium system fitted?
Thinking of getting one fitted to mine prior to collection. What’s your thoughts on it?
Re: What have you bought for the gen4?
Yes I got it fitted by my Motorrad dealer. It's the original Akrapovic as BMW hadn't released one yet. Sounds great and looks fantastic now it's started to purple up with the heat. I would like the extended belly pan as the original one shows the bottom of the engine block.
Yes I got it fitted by my Motorrad dealer. It's the original Akrapovic as BMW hadn't released one yet. Sounds great and looks fantastic now it's started to purple up with the heat. I would like the extended belly pan as the original one shows the bottom of the engine block.
- Joined
- Jun 12, 2019
- Messages
- 952
- Reaction score
- 6
Re: Gen 4 Parts
Fima track fairings on the way :tennis:
Fima track fairings on the way :tennis:
Re: What have you bought for the gen4?
Evotech tail
Evotech pillion peg hole covers
Bmw radiator protectors (look nicer imo)
Bmw axle protectors
Gb racing engine covers
Semi shaded taller screen MRA or BMW
Stompgrips side tank
Motografix tank pad and tail stickers
Limberger carbon belly pan street
That’s enough (for the moment)
Sent from my iPhone using Tapatalk
Evotech tail
Evotech pillion peg hole covers
Bmw radiator protectors (look nicer imo)
Bmw axle protectors
Gb racing engine covers
Semi shaded taller screen MRA or BMW
Stompgrips side tank
Motografix tank pad and tail stickers
Limberger carbon belly pan street
That’s enough (for the moment)
Sent from my iPhone using Tapatalk
Re: What have you bought for the gen4?
As soon as done I post them. Got the bare bike at the moment and that everyone has seen somehow.
Sent from my iPhone using Tapatalk
As soon as done I post them. Got the bare bike at the moment and that everyone has seen somehow.
Sent from my iPhone using Tapatalk
Bikeracer1098
Well-known member
- Joined
- Sep 16, 2019
- Messages
- 211
- Reaction score
- 7
Re: What have you bought for the gen4?
Hi mate hope your well, I remember you from M3cutters
Hi mate hope your well, I remember you from M3cutters
Re: What have you bought for the gen4?
spent a bit of time on there years ago. Place went downhill rapidly
spent a bit of time on there years ago. Place went downhill rapidly
Re: What have you bought for the gen4?
Some parts arrived so did the mounting. The tail was the longest mostly because all those zip ties and how the cables are all tied.
Evotech tail tidy
Bmw axle protectors
Bmw stand bobbins
Bmw high wind shield dark
Stompgrips
The radiator covers were with dealer but I let him do that I don’t have a decent garage or platform to work comfortably.
Sent from my iPhone using Tapatalk
Some parts arrived so did the mounting. The tail was the longest mostly because all those zip ties and how the cables are all tied.
Evotech tail tidy
Bmw axle protectors
Bmw stand bobbins
Bmw high wind shield dark
Stompgrips
The radiator covers were with dealer but I let him do that I don’t have a decent garage or platform to work comfortably.
Sent from my iPhone using Tapatalk
- Joined
- Jun 12, 2019
- Messages
- 952
- Reaction score
- 6
Re: What have you bought for the gen4?
Got the R&G Full titanium radiator and oil cooler covers.
Got the R&G Full titanium radiator and oil cooler covers.
Re: What have you bought for the gen4?
Someone asked how my tank bag was fixed so have put some pictures up. Its the new bmw 1.5ltr one. On my gen 3 I used to put everything in the tail section (puncture kit, wallet, phone). Now way you can do that with the gen 4 so I wanted the smallest tank bag I could find. I want it to be well out of the way of me and the sat nav when its mounted. This looked like a good option. You swap out two screws in the tank cover for the ones in the picture. The bag simply "pops" on and off these two studs. Its really secure. I'm going to stick some venture shield where it sits just so it does not mark the pain. Comes with a small water proof cover too.
Someone asked how my tank bag was fixed so have put some pictures up. Its the new bmw 1.5ltr one. On my gen 3 I used to put everything in the tail section (puncture kit, wallet, phone). Now way you can do that with the gen 4 so I wanted the smallest tank bag I could find. I want it to be well out of the way of me and the sat nav when its mounted. This looked like a good option. You swap out two screws in the tank cover for the ones in the picture. The bag simply "pops" on and off these two studs. Its really secure. I'm going to stick some venture shield where it sits just so it does not mark the pain. Comes with a small water proof cover too.
RammyRR
Well-known member
- Joined
- Apr 14, 2013
- Messages
- 193
- Reaction score
- 0
Re: What have you bought for the gen4?
I’ve got the 1.5 litre tank bag too, got the dealer to install it for £75 - brill little thing, can’t tell it’s there when riding. As you say, you can’t get jack **** under the rear seat cover of an M.
I’ve got the 1.5 litre tank bag too, got the dealer to install it for £75 - brill little thing, can’t tell it’s there when riding. As you say, you can’t get jack **** under the rear seat cover of an M.
Re: What have you bought for the gen4?
Thanks. On a gen 3 R I used to have the Wunderlich bag which locked in a similar way. I found it useful.
Will wait to see if they come with a similar one than this bmw which already looks good imo.
On the rear I have tools and disc lock.
Sent from my iPhone using Tapatalk
Thanks. On a gen 3 R I used to have the Wunderlich bag which locked in a similar way. I found it useful.
Will wait to see if they come with a similar one than this bmw which already looks good imo.
On the rear I have tools and disc lock.
Sent from my iPhone using Tapatalk
Re: What have you bought for the gen4?
Got pads for tank and tail from Motografix.
Like how much the tank pad covers and on the tail I was not so happy that the OEM sticker was not coated so went for this ones.
Look nice I know as I had one on my R before and they hold well for long.
Also the Ilmberger Carbon license plate holder from other angle.
Sent from my iPhone using Tapatalk
Got pads for tank and tail from Motografix.
Like how much the tank pad covers and on the tail I was not so happy that the OEM sticker was not coated so went for this ones.
Look nice I know as I had one on my R before and they hold well for long.
Also the Ilmberger Carbon license plate holder from other angle.
Sent from my iPhone using Tapatalk
Re: What have you bought for the gen4?
Can I ask where you bought the black stompgrips from?
I can only see distributors in Germany for them.
OK, found them at Reactive parts.
Thanks.
Can I ask where you bought the black stompgrips from?
I can only see distributors in Germany for them.
OK, found them at Reactive parts.
Thanks.
Last edited:
Re: What have you bought for the gen4?
My dealer had them when I got the bike so I took them.
I did ordered once from them: directly.
Sent from my iPhone using Tapatalk
My dealer had them when I got the bike so I took them.
I did ordered once from them: directly.
Sent from my iPhone using Tapatalk
RammyRR
Well-known member
- Joined
- Apr 14, 2013
- Messages
- 193
- Reaction score
- 0
Re: What have you bought for the gen4?
Really like the additional graphics you’ve put on but I’ve not managed to find them on the Motografix website, I can find the tank protector but not the other bits - have you had those custom made?
Got pads for tank and tail from Motografix.
Like how much the tank pad covers and on the tail I was not so happy that the OEM sticker was not coated so went for this ones.
Look nice I know as I had one on my R before and they hold well for long.
Also the Ilmberger Carbon license plate holder from other angle.
Sent from my iPhone using Tapatalk
Really like the additional graphics you’ve put on but I’ve not managed to find them on the Motografix website, I can find the tank protector but not the other bits - have you had those custom made?
