What have you bought for the K67?

[ampj8]

Re: What have you bought for the gen4?

Just a bit of carbon where I always wanted to have it installed.

Still waiting for the oil cooler then Ohlins steering damper, gb racing engine protectors and radiator protectors will be installed.

Need some M stickers for the BP

Sent from my iPhone using Tapatalk

 

[Oli]

Re: What have you bought for the gen4?

Looks sensational!

 

[fast_ryan]

alpha Racing

That is a Rolls Royce seat pad. How much are they?

This particular seat bench is listed for €176.06 on the alpha Racing website. Fortunately, I paid a lot less than that for it.

 

[fast_ryan]

alpha Racing Clutch Cable

Why do you need a new clutch cable?

It’s not essential but given the bike will be stripped as soon as it arrives then I may as well fit one. It’s a little bit lighter, and much more flexible than the OEM one, making routing easier. But like I said it’s not really essential as you generally only use the clutch lever when leaving pit lane.

 

[fast_ryan]

Öhlins Steering Damper

... Ohlins steering damper...

FYI the part number for the Öhlins steering damper for the Gen 4 is SD 064.

 

[bmwbadboy]

Re: Öhlins Steering Damper

FYI the part number for the Öhlins steering damper for the Gen 4 is SD 064.

Is it not the same as Gen 3?

 

[fast_ryan]

Öhlins Steering Damper

Is it not the same as Gen 3?

No. The Gen 3 part number is SD 038. That said alpha Racing do sell a mounting spacer, so if you already have one you can fit it to Gen 4.

https://shop.alpharacing.com/shop/i...subcat=0&sort=1a&max_display=200&language=en&

 

[paradoc]

Re: What have you bought for the gen4?

i like the belly pan is it bmw or ilmberger yeah it does need some decals or something to make it pop

 

[ampj8]

Re: What have you bought for the gen4?

i like the belly pan is it bmw or ilmberger yeah it does need some decals or something to make it pop

Yeah need to find a decent shop where to get these decals. It’s Ilmberger. BMW has none for this bike.

I just wanted the cat covered. I need to use the OEM as law enforcement is strict around here.


Sent from my iPhone using Tapatalk

 

[fast_ryan]

Decals

Yeah need to find a decent shop where to get these decals.

Contact Sublime Designs on +447891864997, or via FB, and they will be able to make exactly what you want and ship them to you.

 

[paradoc]

Re: What have you bought for the gen4?

did you need any sort of fitting kit to fit the ilmberger belly pan and does the inner fairing by the sides of the rads have to be removed or trimmed.cheers

 

[ampj8]

Re: What have you bought for the gen4?

did you need any sort of fitting kit to fit the ilmberger belly pan and does the inner fairing by the sides of the rads have to be removed or trimmed.cheers

There is no fitting kit it comes bare.
You need to remove the 4 rubber grommets and a couple of threads out of the OEM and replace them into the carbon belly pan. Easy job.

No need to cut the plastic trim on the sides of the radiator.
I did noticed that there is no hole for the breather hoses though.

The trickiest is fixing it on the area of the radiator because it attaches to the side panels as well. Also check that the threads on the panels don’t move out of place before placing the carbon in. Easier to use a box or something to lift it on place then you can easily do these tasks. The rest goes easy.

You can be firm while aligning the parts in order to insert the bolts.
The pan fits right.


Sent from my iPhone using Tapatalk

 

[paradoc]

Re: What have you bought for the gen4?

nice one thanks for the advice on fitting the belly pan,does it come with any form of a heat shield to stop the carbon from melting,

 

[paradoc]

Re: What have you bought for the gen4?

ampj8 whats the make of your tank knee protectors, also did you remove the org tail grafics before you put on the motografix ones, cheers

 

[ampj8]

Re: What have you bought for the gen4?

nice one thanks for the advice on fitting the belly pan,does it come with any form of a heat shield to stop the carbon from melting,

Yes. Inside it has heat shield let’s see in the hotter months of the year.


Sent from my iPhone using Tapatalk

 

[ampj8]

Re: What have you bought for the gen4?

ampj8 whats the make of your tank knee protectors, also did you remove the org tail grafics before you put on the motografix ones, cheers

The tank side protectors are Stompgrips.

Yes I removed the OEM stickers didn’t liked them not being lackered. With a hair dryer you warm them up and peel them out. It goes out in one piece.


Sent from my iPhone using Tapatalk

 

[paradoc]

Re: What have you bought for the gen4?

cheers for your help,ive ordered the motografix tank pad,and rear seat unit decals,and the belly pan,all I need now is the bike to turn up in march,:race2_smilie:

 

[oldwobbler]

Re: What have you bought for the gen4?

@ampj8 @paradoc - who did you order the belly pan through? Its on my list of things to do.

 

[ampj8]

Re: What have you bought for the gen4?

@ampj8 @paradoc - who did you order the belly pan through? Its on my list of things to do.

I ordered directly from Ilmberger Carbon at their web page. Made bank transfer and presto!


Sent from my iPhone using Tapatalk

 

[paradoc]

Re: What have you bought for the gen4?

performance parts ,01327706139,but they made to order