stuartb
Well-known member
Fitted
Sent from my SM-G975F using Tapatalk
Sent from my SM-G975F using Tapatalk
What did you get in the post today?
- Thread starter Westy
- Start date
Help Support S1000RR FORUM:
BrucieB
Well-known member
I've just bought an ex Lee Johnston OZ rear, arrived today [emoji16] It's not the magnesium version though, they are the version made for Alpha racing but are still just under 1/2 kg lighter than my bent HP wheel [emoji106]A beautiful pair of Ex Lee Johnston NW200 / TT wheels
He did not have much luck with them but they will do me just fine :watermelon:
Oz Cattiva Magnesium rear and HP front with T-Drive discs...
Michelin Power 5's going on later....
View attachment 5382
Sent from my SM-G960F using Tapatalk
stuartb
Well-known member
Biker
Well-known member
- Joined
- Jan 18, 2019
- Messages
- 74
- Reaction score
- 0
Cool.
So you think these are aluminium alloy instead?
I'm coming from stock so the rear is super light in comparison
Last edited:
BrucieB
Well-known member
Biker
Well-known member
- Joined
- Jan 18, 2019
- Messages
- 74
- Reaction score
- 0
I think these wheels are the original Cattiva Magnesium not the RS-A...
The inner sprocket diameter is 76mm which matches the original Cattiva.
Just weighed them ....nearly 4 kg lighter than stock with everything on (stock 15kg - new wheel 11.2kg - including spacers, sprocket carrier, sprocket, tyre).
The inner sprocket diameter is 76mm which matches the original Cattiva.
Just weighed them ....nearly 4 kg lighter than stock with everything on (stock 15kg - new wheel 11.2kg - including spacers, sprocket carrier, sprocket, tyre).
Last edited:
They have weird rear sprocket diameter with only Alpha seems to be making sprockets for it.
BrucieB
Well-known member
My wheel came with 40-43 sprockets which I'll only use the 43. This 44 Afam one off my HP wheel seems to match up [emoji2371]
Sent from my SM-G960F using Tapatalk
Hey mate, Alpha's Cattiva wheels require 80mm inner diameter sprockets.My wheel came with 40-43 sprockets which I'll only use the 43. This 44 Afam one off my HP wheel seems to match up [emoji2371]
Sent from my SM-G960F using Tapatalk
HP or wheels from OZ are 70mm inner, 100mm holes.
Looks like you got OZ wheels, not OZ wheels made by Alpha spec.
Last edited:
BrucieB
Well-known member
Ahh cheers. I was just going by what the seller put on his listing. So will that be the magnesium wheel I've got then?
Sent from my SM-G960F using Tapatalk
OZ makes both aluminum and magnesium
- Joined
- Apr 29, 2017
- Messages
- 1,298
- Reaction score
- 25
Hi, Give either Talon Engineering 4401935471508 or Renthal +44(0)161 406 6399 or your best bet would be B&C Express a ring +44 1522 791369 for one off/strange sprockets.
B&C will make you a one off for the same price as a normal sprocket. They have a massive library of sprocket dimensions. You want a rear sprocket for Freddie Spencers 250cc comstar wheel that failed at Kyalami, they?ll know its PCD, whole spacing etc. All of them will do custom sprockets,but B&C Express will tend do it quicker. J
Last edited:
fast_ryan
Well-known member
- Joined
- Apr 1, 2015
- Messages
- 4,696
- Reaction score
- 18
OZ Racing
If it?s one of Lee Johnston?s Ex-IOM TT Superbike wheels it will be aluminium.
If it?s one of Lee Johnston?s Ex-IOM TT Superbike wheels it will be aluminium.
Got this carbon Shark lid in similar colours to the bike. Loved my previous one but it?s now discontinued as a model. This one seems equally as good. Really like Shark helmets, they fit my bonce really well.
Yes mate.
stuartb
Well-known member
Was just about to buy one of these from Aliexpress as they are only in the region of 16 to 18 quid from China, quick browse thru Amazon yesterday and was fortunate enough to pick same one up for ?18.69 delivered, so there must be a supply here in the UK at Far East prices.
Looks to handle glass mat, gel and wet/sealed so pretty much everything bar Lithiums.
I needed a microprocessor controlled charger for my Leisure battery and was quite impressed by the features, it also drops the output down to 1.5 amp for bikes, my Oxford maintainer as do most bike specific units pushes out circa 1ah, so this fits both bills nicely.
The digital readout is crystal clear and has a cooling fan which runs very quietly. Ideally I was looking for a 10-12a output as my leisure battery is 110ah (charger should be 10-15% of battery output) but as soon as you hit the bigger numbers the prices rise exponentially, an 8 amp will just take a bit longer to charge.
Cracking multifunction bit of kit for under 20 quid with an 8 ah output..
Sent from my SM-G975F using Tapatalk
Looks to handle glass mat, gel and wet/sealed so pretty much everything bar Lithiums.
I needed a microprocessor controlled charger for my Leisure battery and was quite impressed by the features, it also drops the output down to 1.5 amp for bikes, my Oxford maintainer as do most bike specific units pushes out circa 1ah, so this fits both bills nicely.
The digital readout is crystal clear and has a cooling fan which runs very quietly. Ideally I was looking for a 10-12a output as my leisure battery is 110ah (charger should be 10-15% of battery output) but as soon as you hit the bigger numbers the prices rise exponentially, an 8 amp will just take a bit longer to charge.
Cracking multifunction bit of kit for under 20 quid with an 8 ah output..
Sent from my SM-G975F using Tapatalk
stuartb
Well-known member
This wee charger is cracking.. my MM shows 2 decimal places..and mirrors the output of the charger nicely. Switched it to bike and immediately dropped to 1.5 amps... great purchase.
Sent from my SM-G975F using Tapatalk
Sent from my SM-G975F using Tapatalk
This came today so got it fitted tonight.
View attachment 5585
View attachment 5585
Attachments
Last edited:
