visor steaming up

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
They come with instructions, you need to have the 'posts' on the inside of your visor (check if your lid has them otherwise you'll need to get a suitable visor), you then gently flatten the visor popping the pinlock insert tabs inside the posts, smooth it out to ensure there aren't any air bubbles and job done. Most importantly make sure the pinlock is the right way up and also the right way round before you put it in as they will only take so much fannying about when you put them in.
 
Last edited:
If by some fluke you require a Shark pinlock visor for a Shark Speed R I have one spare that needs a new home.
 
The agv (i have a corsa) do suffer badly with misting and you may well get issues with the pinlock as well due to the angle of the visor. I found it best to put it in as usual and push the pinlock up the screen to seat it properly

Sent from my SM-G920F using Tapatalk
 
Pinlocs are good. I have one in my Schuberth but although my normal visor doesn't steam up now, the sun visor does, and so do my specs ��
 
Pinlock defo. Ive used them for years.... watch the youtube vids for installation and wear latex gloves incase you touch the visor surface side.... very easy to mark

Sent from Galaxy S7
 
Back
Top