Torque wrench

[Loupe]

What make do you have? I've had a look at some but not sure what I really require. The halfords one had a good review but I'd like opinions please.
I'm not looking for the best or the worst, just something that I can use on the bike for wheels etc.
While I'm at it, a semi decent socket set would be a good idea if you have any recommendations.
Thanks!

 

[Stephen]

This might be a bit much if it's just for light duties but I use a brilliant snap on one, it's digital so it's very easy to set various torques in ftlb nm and a few other measurements I've not heard of. It also has a gyroscopic sensor for tightening down in degrees.

As for socket sets, I also use snap on but W?rth do some quality tools so it might be worth giving them a try? I think they're called Zebra

 

[Loupe]

Thanks for the quick reply Stephen. I've not got a clue what you're on about regarding ftlbnm but it certainly sounds impressive!
Ill have a look at the wurth tools.

 

[alex]

I have these two Drapers...as yet untested

- Sent from Mobile Device

 

[Stephen]

Thanks for the quick reply Stephen. I've not got a clue what you're on about regarding ftlbnm but it certainly sounds impressive! Ill have a look at the wurth tools.

Ftlb = Foot-pounds

Nm = Newton Meters

 

[soofsayer]

I use a couple of drapers for small stuff and the big halfords one for the rear wheel because from memory the rear axle nut is 90nm.

If you fancy the Wurth stuff hold off if you can as we are sorting out a trade account with trade prices for premier members.

 

[cally1066]

I got two halfords torque wrenches 0-60 nm and one from 40-200 nme plus the 200 halfords professional tool set excellent equipment and a lifetime guarantee what more could you want lol

 

[Loupe]

I use a couple of drapers for small stuff and the big halfords one for the rear wheel because from memory the rear axle nut is 90nm.

If you fancy the Wurth stuff hold off if you can as we are sorting out a trade account with trade prices for premier members.

Great I'll wait to see what the prices are compared to Halfords. I know it's apples and pears but I'm not looking to start up as a mechanic. Thanks for the info

 

[Loupe]

I have these two Drapers...as yet untested

- Sent from Mobile Device

Looks impressive! I'll compare to the other recommendations.
Thanks!

 

[Shad3]

Hey,

I've got this one.

http://www.amazon.co.uk/Silverline-...&qid=1456487380&sr=8-3&keywords=torque+wrench

did a good job to add the rear pegs.

 

[Loupe]

Cheap! Thanks, I'll see what else comes back. Looks good for the cash.

 

[richy170]

Can't go wrong with Halfords Professional with a no quibble life time guarantee. Any problems and they will just replace with new. I have two of their torque wrenches and they are superb. Also if you keep your eye out often the tools and socket sets are sold at half price. I am sure there are better manufacturers out there but for the home mechanic they are perfect.

 

[fast_ryan]

Beta Tools

Highly recommended.

http://www.beta-tools.co.uk/online-brochure/

 

[Iain-s1000rr]

I work in the submarine building industry & we have a contract with beta, IMO spot on. Maybe im biased as i can grab them for free

 

[Loupe]

Thanks guys, plenty of options to look at. I'll go and do my homework now.

 

[fast_ryan]

Torque Wrench

Just make sure that you purchase one with a suitable range of adjustment and socket size adequate for the work that you want to do on the bike.

 

[roadrunner]

Re: Torque Wrench

Just a bit of advice if you don't know already. Always remember to wind it back to zero after you've used it and before putting it away.

 

[stuartb]

Just a bit of advice if you don't know already. Always remember to wind it back to zero after you've used it and before putting it away.

+1 on this

 

[Loupe]

Re: Torque Wrench

Just a bit of advice if you don't know already. Always remember to wind it back to zero after you've used it and before putting it away.

Never used one in my puff so that's really helpful. Thanks!
As said before, it's only really to change my wheels but there's a few things that need to be the correct torque according to the handbook.
I thought wheel change was straight forward but I've to watch wheel sensors and only take out wheel bolts from one side etc. I'm nervous now lol

 

[soofsayer]

Everything should be set to the correct torque loupe.

If you follow your owners handbook you can't go wrong, it is easier than it may first appear. Practice makes perfect.