Whitty1000rr
Active member
- Joined
- Sep 23, 2017
- Messages
- 26
- Reaction score
- 0
HI . Hoping some of you can help as im having a struggle when removing/ installing rear wheel. Its on a 2010 track bike with lightech adjusters and captive spacers. The worst part is installing as when i lift the wheel in it seems tight between the swingarm and the spacers catch. They are the correct captive spacers for the 2010. Now when i put the sprocket carrier on that i had with my spare wheels its easy to get in but leaves a gap between swingarm about 5mm. I take it that this carrier is from a 2015 onwards? Is it correct that all wheels are same and the only thing that changed was the carrier ? One thing ive noticed between the two carriers is the spacer that sits behind the bearing is about 5mm longer on the 2010 ! When removing i find i have to move the adjusters so the spindle will come out (chain slack is correct ) . Any ideas what the problem might be or where i can get correct sizes of all the spacers that are on the rear ? Thanks Mart