Indicators dont work with engine running

[r15suk]

Can anyone help with this issue please?

I have fitted Watsen Design indicators (including the resistors) to the front and Motordynamic flush mount (including the resistors) to the back. Turned on the ignition and checked the flash rate for both sides - awesome and no error code on the dash. All's good!

However when i turn the engine on, the indicators dont flash, the error code comes up on the dash and the green indicator warning light flashes very fast.

It was originally fitted with standard indicators and not factory LED ones.

Cheers
Simon

 

[Explorer]

I had a similar problem when I fitted my watsens, I ended up cutting the resistors off and that sorted it.

 

[r15suk]

I had a similar problem when I fitted my watsens, I ended up cutting the resistors off and that sorted it.

Many thanks. Motordynamic suggested the same thins as they said that their resistors should compensate for front and rear. I'll be trying that later today then.

Cheers
Simon

 

[r15suk]

I had a similar problem when I fitted my watsens, I ended up cutting the resistors off and that sorted it.

Yep that did sort it!

Simon