Female torx socket... Any recommendations on make? I have 3/4 drive ok but wall is too thick and marks the calipers. No dimensions on wall sizes on line so wondering what make ppl are using ?
Brake pad pins.
- Thread starter bananaman
- Start date
Help Support S1000RR FORUM:
cheapest no-name off ebay
https://www.ebay.co.uk/itm/232348874766
No issues whatsoever in 3 years
Seals and pistons will get fu?ked earlier
24jseymour
Active member
- Joined
- Feb 13, 2021
- Messages
- 30
- Reaction score
- 0
I had the same issue, mine was 1/2? drive still managed to get them out but wasn?t ideal.
I?m going to get a set of Alpha bolts or similar. Can?t go wrong with a good old 10mm.
Until you loose it that is
Sent from my iPhone using Tapatalk
I?m going to get a set of Alpha bolts or similar. Can?t go wrong with a good old 10mm.
Until you loose it that is
Sent from my iPhone using Tapatalk
I had the same issue, mine was 1/2? drive still managed to get them out but wasn?t ideal.
I?m going to get a set of Alpha bolts or similar. Can?t go wrong with a good old 10mm.
Until you loose it that is
Sent from my iPhone using Tapatalk
Good shout
How much !!!!!
24jseymour
Active member
- Joined
- Feb 13, 2021
- Messages
- 30
- Reaction score
- 0
Haha! Alpha for you [emoji1787] try eBay item number: 123973972651 titanium ones from racefastners ?32.
24jseymour
Active member
- Joined
- Feb 13, 2021
- Messages
- 30
- Reaction score
- 0
Oh god. The ?6 socket set from eBay it may have to be then [emoji23]
They aren't pins, they are the bolts for the caliper. Thought you wanted the brake pad pins.
Figure of speech, pad pins/bolts/fasteners/retainers don't all gen 4's have the same?
