Mick753
Well-known member
Anyone ever heard that noise coming from the under the seat area near the ABS unit at all?
Generally when I turn the key on the bike prior to firing her up I get the normal servo ticking but having done a couple of hundred miles today I got home and when I wheeled her back into the garage and turned the key to check something on her, I noticed instead of the normal ticking there is now a beeping noise, as in 2 beeps a pause then 2 beeps and so on and so forth, it doesn't stop until you start the engine at which point I assume it stops not that I would hear it anyway
Anyone ever encountered that at all?
Had a bit of an issue with my brake light playing up when I was out, I have one of the integrated indicator rear light units although they are not wired up so it is effectively just a stop and tail light unit, the connection isn't the best so I suspect that a vibration caused a fault (LAMPR) and whilst the tail light works fine the brake light on both the lever and pedal activates for a split second only, I am going to change back to the standard light unit as I suspect that will sort it but I don't suppose if there is a fault on the brake light circuit it is going to cause any problems on the ABS module (proper stab in the dark that by the way! ) as it actually sounds the beeping is an audible alarm
Generally when I turn the key on the bike prior to firing her up I get the normal servo ticking but having done a couple of hundred miles today I got home and when I wheeled her back into the garage and turned the key to check something on her, I noticed instead of the normal ticking there is now a beeping noise, as in 2 beeps a pause then 2 beeps and so on and so forth, it doesn't stop until you start the engine at which point I assume it stops not that I would hear it anyway
Anyone ever encountered that at all?
Had a bit of an issue with my brake light playing up when I was out, I have one of the integrated indicator rear light units although they are not wired up so it is effectively just a stop and tail light unit, the connection isn't the best so I suspect that a vibration caused a fault (LAMPR) and whilst the tail light works fine the brake light on both the lever and pedal activates for a split second only, I am going to change back to the standard light unit as I suspect that will sort it but I don't suppose if there is a fault on the brake light circuit it is going to cause any problems on the ABS module (proper stab in the dark that by the way! ) as it actually sounds the beeping is an audible alarm