Any compatible parts between a 64 plate and a new 66 plate 1000RR

[neilma]

Hi folks

I have just signed for a new 1000RR to pick it up in a couple of week and will be looking to trade in the "old" one (64 plate).

Was just wondering if anyone could confirm if any of the parts that I remove from my old one will fit the new one? (If not, I'll get them up here for sale in due course).

So I have.....

Akro Exhaust (almost certainly a no)
Wunderlich brake and clutch levers
Helibars
Rider Foot Pegs (Bolt on resplacements for useless when wet originals - not full Rearsets)
RandG Tail tidy
R&G Radiator and Oil Cooler guard

Thanks
Neil

 

[alex]

I'd be interested too as I will have to go through the same process at somepoint. I'd rather move the parts rather than sell them. Wheels included.

In your case I'm fairly sure pegs are universal. Can't see why the helibars wouldn't...guards too. But suspect with cruise control the levers wouldn't.
Exhaust header ports are smaller on the new bike. So you would need new headers at the very least.


- Sent from Mobile

 

[ekdg]

helibars should fit
tail tidy will fit
rad and oil guards will fit

 

[MacRR]

Assume this old 64 plater is a gen 2 as I have an equally old 64 plate gen 3

 

[bananaman]

Wheels fit with appropriate spacers, think pegs are different in the hole spacing in the frame

 

[neilma]

Assume this old 64 plater is a gen 2 as I have an equally old 64 plate gen 3

Ah good point - Yes this is a reaaaallly old 64 plate GEN 2 (Sep 2014)

Does that change any of the responses?
Cheers
N

 

[alex]

Wheels fit with appropriate spacers, think pegs are different in the hole spacing in the frame

Do you mean pegs or rearsets? I know the rearsets are different.

 

[neilma]

Do you mean pegs or rearsets? I know the rearsets are different.

Just the pegs - I don't have the rearsets.

 

[alex]

Just the pegs - I don't have the rearsets.

I know YOU do... was asking the other chap about his advice. :facepalm:

 

[neilma]

Oh

Sent from my SM-G930F using Tapatalk