Part For Sale Alpha Racing 2D Front DDC 150mm sensor

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Part For Sale

richy170

Well-known member
S1000RR Supporter
Joined
May 30, 2015
Messages
331
Reaction score
0
Location
Farnborough
This sensor is just over two years old. It has only been used on 8 occasions which represent each of the track days I have done. I have now sold the bike so this is surplus. Currently £462 on Reactive Parts. I’m selling for £275.

2D suspension kit front DDC, BMW S 1000 RR 2009-2018 and HP4, for OEM wiring loom, suspension sensor 150 mm

alpha Racing DDC Front Suspension Sensor Kit BMW S1000RR, HP4 (2012-, 2015-), easy Plug & Play into OEM loom, with suspension sensor 150mm, billet aluminum bracket with HP4 logo, steering stops, and installation instructions. Note: Optional for STANDARD 2010-2013 BMW S1000RR in combination with interface module and harness (7470A109A00-01 and 7470A109A01-01). Allows the HP4 and 2015- BMW S1000RR's DDC Electronic Suspension ECU to attain real-time front fork travel information + information from rear Bosch ride height level sensor (located at rear shock) for best Dynamic Damping Control modulation of the EDM system in the DDC Fork. We refer to the OEM DDC System as Semi-Active because the DDC ECU is using ONLY the rear ride height sensor (no input from front fork), and we refer to a DDC suspension with the Front Sensor installed as Fully-Active because the DDC ECU is actively receiving information from the front and rear of the S1000RR. This allows for precise control of the DDC EDM valving that can make better decisions in modulating.

alpha Racing

BMW

S1000RR

2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010, 2009
 

Attachments

  • IMG_2216.jpeg
    IMG_2216.jpeg
    73.8 KB
  • IMG_2215.jpeg
    IMG_2215.jpeg
    78.3 KB
  • IMG_2217.jpeg
    IMG_2217.jpeg
    81.8 KB
  • IMG_2218.jpeg
    IMG_2218.jpeg
    85.1 KB
  • IMG_2219.jpeg
    IMG_2219.jpeg
    40.5 KB
  • IMG_2220.jpeg
    IMG_2220.jpeg
    78.3 KB
I have one on my 2018 Gen K46 (as Alex says, you can get a kit to fit it to the K67 fork too) and fitting this makes a whole heap of difference to my front suspension feel with the additional settings enabling rebound and compression in the bike's standard Settings menu. It's plug and play to connect it to the wiring loom. After I had fitted mine and calibrated it (about 2 hours total from starting out) it made a whole heap of difference to my riding as I finally got the front end feel I was looking for. I ride my bike only on road and I fitted mine about 5 years ago and it still works, touch wood. It's not just another track tool. Buy it, you'll enjoy the difference it makes to your bike
 

Latest posts

Back
Top