r25sti
Well-known member
few pictures as i was doing it. the 17 is different from my 15 plate as in the throttle dosnt have the wires on the 17 but a printed type board. the l/h and r/h both come off the same, just lightly score with a blade and pull the old rubber away. on the throttle side there are a few little barbs sticking out that i nibbed off with a dremel, the throttle side i have just glued the new grip on with grip glue but the clutch side i have covered the fine heating wires with silicone to stop them from moving as i slide on the new grip. i will let the silicone go off over night before fitting the new grip.
Last edited: