Wiring Diagram

[Revolution72]

Hi,

Does anyone have a wiring diagram for the S1000RR??

I'm particularly interested in the handlebar switches, building a track bike so would like to reappropriate some of the functions on the switch.

Regards,

Ryan

 

[apetrov1x5]

I think it might help me in retro-fitting the heated grips on my 2010 bike...

did you find the diagram?

 

[Ducky]

Might be easier to buy one of the STM switchgear units if all you want to do is move some controls about.

 

[regulus racing]

I have a complete wire diagram for 2012 and later S1000RR's. It does not cover the HP4's. It cost me a significant amount of money to obtain it so I can't provide a copy but I can answer specific questions and provide drawings of specific areas.

 

[Ducky]

I have a complete wire diagram for 2012 and later S1000RR's. It does not cover the HP4's. It cost me a significant amount of money to obtain it so I can't provide a copy but I can answer specific questions and provide drawings of specific areas.

I don't suppose you have a link to where this diagram can be purchased dude, for those who fancy their own copy?

 

[regulus racing]

I actually got my diagram by the "Brute Force" method; I purchased a new harness and stripped it bare to diagram everything out. I am slowly diagraming everything out in my CAD software now. I can provide you with specific information if that would help.

 

[regulus racing]

Once I have the CAD drawing finished, I do plan on sharing. I should have mentioned in my original post that I have the diagram for the main harness and not the smaller, engine harness. I did purchase one of those to disassemble as well, but I have not started on that one yet. The main harness is the important one to have though. I have the ECU pin numbers and corresponding wire colors and their paths. I have also isolated all of the CAN bus wires and their paths. I have all of the fuses and relays identified and all of their functions, as well as their wiring colors and paths. I have all of the wires into the dash assembly traced and identified. I also have the switch assemblies wiring identified by function and color.

I guess what I'm saying is I have the complete main harness decoded and all wiring colors traced and identified. I just have not finished putting it all down into one unified drawing yet.

I would be happy to help anyone with any questions, and provide you with simple drawings about specific switches, wiring colors, and such.

 

[Ducky]

Sounds like a long job you got there dude, very decent of you to share the information.

 

[timmo]

Once I have the CAD drawing finished, I do plan on sharing. I should have mentioned in my original post that I have the diagram for the main harness and not the smaller, engine harness. I did purchase one of those to disassemble as well, but I have not started on that one yet. The main harness is the important one to have though. I have the ECU pin numbers and corresponding wire colors and their paths. I have also isolated all of the CAN bus wires and their paths. I have all of the fuses and relays identified and all of their functions, as well as their wiring colors and paths. I have all of the wires into the dash assembly traced and identified. I also have the switch assemblies wiring identified by function and color.

I guess what I'm saying is I have the complete main harness decoded and all wiring colors traced and identified. I just have not finished putting it all down into one unified drawing yet.

I would be happy to help anyone with any questions, and provide you with simple drawings about specific switches, wiring colors, and such.

Would you mind helping me with an enquiry ,
i have a plug under my fuel tank which is just floating around
not connected to anything ,it looks a bit like a plug that would be connected to
an injector of a coil pack.
it has two wires ,yellow with a brown trace
and blue with a green trace .
i suspect it's a redundant plug from the U.S. Spec fuel valve
but I am suspicious as the guy that had it before me did all sorts
of interesting mods lol
any help would be much appreciated .

 

[Don'task]

Would you mind helping me with an enquiry ,
i have a plug under my fuel tank which is just floating around
not connected to anything ,it looks a bit like a plug that would be connected to
an injector of a coil pack.
it has two wires ,yellow with a brown trace
and blue with a green trace .
i suspect it's a redundant plug from the U.S. Spec fuel valve
but I am suspicious as the guy that had it before me did all sorts
of interesting mods lol
any help would be much appreciated .[

Charcoal filter for U.S.A. market don't worry

 

[mike g]

I've got a thread running on my current problems, but I think the route cause is the dash isn't getting 12 volts (the fuse is ok) can you advise which of the 2 plugs or pins should be live please?
thanks

 

[roger64racing]

I've got wiring diagrams if anybody wants them emailed.

 

[mike g]

Pm sent. Thanks

 

[0074]

PM send

 

[johnny1more]

hi i am looking for a wiring diagram for the fueling system and ecu pins and wire colouring for a bmw s1000rr 2012. I don't have any throttle its stripped and the butterflies are not moving, any ideas please.

 

[johnny1more]

yes please send it though

 

[Дмитрий Усков]

Hi guys! Very sorry for necro post. Looking for wiring diagram for K42 HP4'2014. If someone can help, I will be very greatful. Salute from Ukraine.

 

[alex]

The "Haynes" manual was the only place I knew of one.
https://haynes.com/en-gb/bmw/s1000rr/2010-2017

 

[Дмитрий Усков]

The "Haynes" manual was the only place I knew of one.
https://haynes.com/en-gb/bmw/s1000rr/2010-2017

Unfortunately HP4 not covered.

 

[alex]

Unfortunately HP4 not covered.

2015+have the hp4 electronics.