Whats this plug?

[alex]

Can someone confirm what this is?
Location is near side of frame near exhaust servo.
Solid yellow wire and blue/yellow wire.

- Alex

 

[mibridger]

Hi Alex,
I believe it's the connector for the front suspension sensor, mine is on it's way to Almeria, but from memory, that is what it's for.

 

[alex]

Hi Alex,
I believe it's the connector for the front suspension sensor, mine is on it's way to Almeria, but from memory, that is what it's for.

The 2D is plugged in...
Its not that. But thanks for playing

 

[bananaman]

Airbox sensor?

I guess you use fairy liquid...... You may be too young to get that lol

 

[alex]

Hmmm...where on the airbox would that go in? (I did fiddle with it)

 

[scooby]

not airbox i dont think,it's not connected to anyhthing onmy bike either,so could well be fan related but would need to have a look at a diagram to be sure

 

[alex]

I think its DDC...

- Alex

 

[Oli]

I think its DDC...

- Alex

+1

 

[scooby]

deffo is,it's been annoying me so just found this :calm:

https://www.youtube.com/watch?v=kjE8FSQJIWw

 

[scooby]

@1.50

 

[fast_ryan]

DDC Plug

It?s the DDC plug. I would just tape up the connector to avoid any dirt or water ingress and then secure it to the wiring harness so it?s out of the way.

 

[alex]

For reference

- Alex

 

[mibridger]

I told you that it was for the 2D suspension sensor last week.


Sent from my iPhone using Tapatalk

 

[fast_ryan]

DDC Plug

It?s the plug for the DDC. Your left with that when you remove the DDC system from the bike and fit a cartridge kit. The plug for the 2D potentiometer has different wires and is shown on the far left (?Ride Height Sensor, Front?) of the wiring diagram above.

 

[mibridger]

Ok, apologies Alex.


Sent from my iPhone using Tapatalk

 

[scooby]

For reference

- Alex

what manual is that,haynes?

 

[alex]

Yes chap