Torque settings?

[Derwyn]

Is there a definitive list of torque settings for the various fixings on the s1000rr?

I am looking to obtain a nice torque wrench so could use the info.

Tah.

 

[Niven770]

I doubt if you will get 1 torque wrench to cover all settings - They range from 3Nm to 150Nm

Davy

 

[Derwyn]

I shall get 2 if need be, Thanks for the info. Someone must have compiled a list of common settings.

Halfords wrenches any good?

Nice avatar by the way.
Tah.

 

[thompsp]

I downloaded the Service Maual to get all my torque setting info. I think that you can still get it for free from here: http://www.mediafire.com/download/s...anuals+K46+S1000RR+(3rd+Edition,+07-2012).zip

 

[Derwyn]

No joy with that link via my phone, will try with pc later.

There is no text in the verification box?

Thanks

 

[thompsp]

No, it's a very large zip file and u need to install it on your PC or Mac (can't install on a phone).

 

[Niven770]

PM me your email address and I'll send you 5 PDF's with the Torque settings.
They have been extracted from the manual mentioned above

Davy

 

[soofsayer]

Halfords wrenches any good?

I got one of these for my rear wheel axle:

http://www.halfords.com/motoring/ga.../halfords-professional-torque-wrench-40-200nm

Works well, no issues.

I use a Draper for the smaller stuff. I bought the draper first, should have bought a smaller one i.e. lower settings, as it is a little clumsy.

http://www.tooled-up.com/product/dr...oductlisting&gclid=CIKhk5rGlcICFScXwwodWmUAeQ

 

[Derwyn]

PM me your email address and I'll send you 5 PDF's with the Torque settings.
They have been extracted from the manual mentioned above

Davy

Spot on Davy! cheers

 

[Derwyn]

I got one of these for my rear wheel axle:

http://www.halfords.com/motoring/ga.../halfords-professional-torque-wrench-40-200nm

Works well, no issues.

I use a Draper for the smaller stuff. I bought the draper first, should have bought a smaller one i.e. lower settings, as it is a little clumsy.

http://www.tooled-up.com/product/dr...oductlisting&gclid=CIKhk5rGlcICFScXwwodWmUAeQ

Thanks soofy. Recommend the Draper? Nice to use?

 

[soofsayer]

Thanks soofy. Recommend the Draper? Nice to use?

Draper is fine and a nice wrench to use. No problems.

 

[Toby-S1000rr]

PM me your email address and I'll send you 5 PDF's with the Torque settings.
They have been extracted from the manual mentioned above

Davy

i. Just joined the group and read it your message from 2014. By any chance do you still have those PDFs with the torque settings? Many thanks Toby

 

[Mutl3y]

both mine are from Halfords, also no issues with them
Mut