Tank grips/pads

[Cammy46]

These are the Eazi Grip Evo tank pads on my Gen 4. Apologies about the air bubble, I assure you it annoys me more than anyone else!

 

[Oli]

I had the TechSpec X-Line on my Gen 4 and, whilst expensive, they were fantastically grippy when both dry or wet and didn?t cause any issues on textiles or leathers

 

[Fraggle]

These are the Eazi Grip Evo tank pads on my Gen 4. Apologies about the air bubble, I assure you it annoys me more than anyone else!

I had air bubbles appear after a few days on mine. I used a heat gun to get rid of them

 

[Cammy46]

I had air bubbles appear after a few days on mine. I used a heat gun to get rid of them

Thanks for the heads up, I?ll give it a try and see if I can get it out!

 

[Wull]

Got the Eazi Grip on mine

View attachment 6365

is that the pro? Same as what?s on my wife?s GSXR 600, it?s hard to tell from the picture but can just make out the smaller dimples in it I think.

 

[CMD6319]

I purchased Stompgrips from Alpha racing, opted for the clear type, as I feel they don?t spoil the looks of the painted tank.
Unfortunately I am unable to upload a picture.

 

[Reaperman]

What we got? Pics showing them please?

I noticed some scratches to the tank yesterday after the ride out so I should have got some from the beginning but it had completely slipped my mind. I?ve always used Stompgrips and I have a set of the Eazi Grip Pro tank grips and pad on the wife?s K7 GSXR 600.

I?m considering trying the Eazi Grip Evo version but was hoping to see a set fitted to the Gen 4 especially a black one.

I want them sooner rather than later to stop them from getting worse plus it?ll serve a purpose when on track and road riding briskly.

I fitted the Eazi-Grip Pros (Black) and they do certainly help on heavy braking etc

 

[masho46]

I fitted the Eazi-Grip Pros (Black) and they do certainly help on heavy braking etc

Hi mate just a question on your bike pic the akra end can did it need to go on a dyno for fuelling?

Sent from my SM-G781B using Tapatalk

 

[Pedro3178]

Hi mate just a question on your bike pic the akra end can did it need to go on a dyno for fuelling?

Sent from my SM-G781B using Tapatalk

Looks like a slip on so no remapping required. Normally only required for a full system as you will remove the cat.


Sent from my iPhone using Tapatalk

 

[Wull]

Remember guys the beemer has wide band sensors so in theory you could fit a full system and run it, I?m not recommending that just that it is doable. So on that note a slip on would be no issue at all.