Swingarm Spools

[Schuey]

Just received the BMW Swingarm Spools for the Gen 4 through the post.

No instructions on torque settings etc.. Anyone have any idea on torque settings? And do you guys normally use thread-lock on them?

Thanks.

 

[Richinio]

Just received the BMW Swingarm Spools for the Gen 4 through the post.

No instructions on torque settings etc.. Anyone have any idea on torque settings? And do you guys normally use thread-lock on them?

Thanks.

R&G recommend 20nm for their M8 bolts. I've never used thread lock personally.

 

[soofsayer]

No thread lock, bit of anti-seize, and I thought it was around 12nm for these but could be wrong....

 

[fast_ryan]

Just torque them to a sensible amount so they are tight and you will be fine.

 

[Sam76]

Gilles recommends 15nm on there instructions

 

[Schuey]

Gilles recommends 15nm on there instructions

Thanks, I did go with 15 Nm in the end, the BMW ones are made by Gilles so that gives me confidence.

 

[r25sti]

pinch them up.

 

[Nige-K]

Can anyone recommend a rear paddock stand?

 

[fast_ryan]

Rear Paddock Stand

Can anyone recommend a rear paddock stand?

See link below...

https://s1000rrforum.co.uk/showthre...-stands-do-you-use&highlight=Harris+rys1000rr

 

[bmwbadboy]

Can anyone recommend a rear paddock stand?

MotoGP or ConnStands

 

[bmwbadboy]

Just received the BMW Swingarm Spools for the Gen 4 through the post.

No instructions on torque settings etc.. Anyone have any idea on torque settings? And do you guys normally use thread-lock on them?

Thanks.

Used thread lock, tightened with a sensible force

 

[Nige-K]

Thanks guys.