Quick PCV question

[Dannycox]

When you buy a PCV does this come with an o2 eliminator kit???? I was reading somewhere that if you have a PCV there is no need to fit your o2 sensor to the full akapovic exhaust system????? how can this be??? and is it correct???

cheers. Danny

 

[Tim_S1K_RR]

I got my bike with full system fitted which had O2 sensors fitted. When I fitted the pcv I disconnected them as in instructions. Bike runs fine but its worth getting it on the dyno for best results mines booked in Tuesday bring on the power and a nice smooth curve.

 

[Dannycox]

thats great tim....can you post your results when you have it done??? how does it run with the standard map???

 

[cally1066]

Yes as above they have to be disconnected,

 

[Tim_S1K_RR]

thats great tim....can you post your results when you have it done??? how does it run with the standard map???

Think I put in the stubby akrapovic map and oe filter. But I'm running a long race pipe and k&n it has improved mid range somewhat top end can't tell it's always been ballistic. May be a little flat spot about 4k rpm but you can't really notice. I had a blade b4 with same mods and it was better than the STANDARD BMW I demoed. I'll try put up results but I couldn't get pics to upload b4. May have to ask turtle for some help see if we could start a thread with everyone's graphs on to compare which tuners have generous dynos and who can boast biggest numbers ( maybe a hilltop customer).

 

[Tim_S1K_RR]

thats great tim....can you post your results when you have it done??? how does it run with the standard map???

Had 185 first run and finished with 190 with all gears mapped separately.
Pulls beter lower down and is very smooth now, in all not the biggest numbers but the bike feels great.
But on comparing graphs to my blade that had more power and higher touque up to 9000 rpm but after it is total eclipsed.