Minha moto não dá sinal de ligar

[Ajj]

No.

 

[Ajj]

.

 

[Paulo]

No.

A antena da chave não interfere no funcionamento também?

 

[Paulo]

Na imagem que enviei acima aparece a antena ralado aparecendo o cobre, isso não interfere em ligar a moto também?

 

[Ajj]

I had a quick look and saw the screen. Didn't notice the ignition. ‍♂
I would think so.

 

[scooby]

dash won affect it, and if the antenna wasn't working (ignition) then you would (or should art least) get the EWS fault message on the dash

 

[Paulo]

I had a quick look and saw the screen. Didn't notice the ignition. ‍♂
I would think so.

Vou comprar uma antena nova então.

 

[Paulo]

dash won affect it, and if the antenna wasn't working (ignition) then you would (or should art least) get the EWS fault message on the dash

Não aparece nada, não acende nenhuma luz e mensagem do EWS

 

[Paulo]

Ontem eu enviei a bicicleta para loja que faz alinhamento dos quadros A e B, aqui no Brasil o quadro B esta saindo R$12.000,00 reais por volta de $ 2.500,00 dólares, então revolvi fazer o alinhamento e leva alguns dias para eles devolverem a bicicleta.
Assim que devolverem já estarei com a antena comprada e irei fazer o teste.
Assim que fizer o teste volto a falar aqui com os amigos.
Obrigado a todos pelas mensagens de ajuda.

 

[Paulo]

Depois se vocês puderem mandar aqui o que vocês fazem de melhoria nas bicicletas para andar mais irei ficar muito grato.
Aqui no Brasil tem muita rivalidade de s1000 com zx10.
E tem corrida ( racha ) para ver quem anda mais.
Eu como não gosto de perder quero fazer as alterações para melhorar minha k46 para não perder para eles.

 

[bananaman]

Paulo,
As @bananaman is saying above, can you identify the high tension leads to the starter solenoid and put a different charged up 12V battery connection to it?
Agree with starter motor, sounds like not enough current to spin it, just enough to partly activate the solenoid I'd look for bad earth, can you get to the starter and put a direct feed to it? (live and earth)
Paul

As @bananaman is saying above, can you identify the high voltage cables for the starter solenoid and put a different charged 12V battery connection on it? The starter motor positive lead position is shown below. The positive lead position of the starter motor is shown below "2"

I agree with the starter, it seems that there is not enough current to turn it, just enough to partially activate the solenoid. I would look for bad dirt, can you get to the starter and put a direct feed into it? (Living and earth)
View attachment 5573
Click to expand...

Put power directly into the starter motor to test, do I disconnect the cables and put power directly?

Put power straight from 'your' battery to the starter positive (+) to eliminate solenoid problem. If same, use fresh battery, if same it would point to the starter being the problem. Process of elimination.

 

[scooby]

to be fair, watching the vid again, theres no reason the starter should be energising as button isn't being pressed, so that isn't the imediate issue. could well be a relay issue , try swapping them out in the main fuse box+starter circuit (where main fuse is). there must be a short/loose wire somwhere, be it battery or earth, just need to go through it all.

 

[Paulo]

Put power directly into the starter motor to test, do I disconnect the cables and put power directly?

Put power straight from 'your' battery to the starter positive (+) to eliminate solenoid problem. If same, use fresh battery, if same it would point to the starter being the problem. Process of elimination.

Entendi, irei fazer o teste assim.
Obrigado

 

[Paulo]

to be fair, watching the vid again, theres no reason the starter should be energising as button isn't being pressed, so that isn't the imediate issue. could well be a relay issue , try swapping them out in the main fuse box+starter circuit (where main fuse is). there must be a short/loose wire somwhere, be it battery or earth, just need to go through it all.

Os reles eu tirei todos, 1 a 1 e fui testando e nada tb.
O Terra parece estar certo, não tem nenhum fio solto.