Chain and sprocket

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Snow

Well-known member
Joined
Jul 13, 2016
Messages
234
Reaction score
0
Location
York
As per alexs advice i am Going to fit a 16t front sprocket as mine has started rounding over anyways. The chain has got a kink in it aswell so probly going to have to get a full set. For a 2010 sport, online its saying a 520 but its currently using a 525.
What should i get to go with the front 16t best.
Ps mainly road riding
Thanks
 
I've toyed with the idea of a smaller front sprocket so I'd be very interested to hear how you get on
I'd also keep with the 525
 
Will do, ive heard it makes it wild haha
The rear sprocket is still decent so anybody know if i can just replace the dodgy link or is that abit dangerous
 
Good practice to replace the full set, as the sprockets and chain will be worn to each other. If there a tight link I would be replacing the chain without any doubt. It has to deal with a lot of power. I've had a chain break due to a tight link, luckily no harm done as I was only doing 20mph in traffic. Hate to think what would of happened if the throttle was wide open.
 
am with Kenny on this snow change the lot , wouldn't even consider changing links tbh, look up Stephen on here , he did me a great deal on a set , pics of mine are in my showroom thread mate.
 

Latest posts

Back
Top