Bahco 54 piece drive set

[stuartb]

These are really handy for the more "intricate" moments in our lives..

Bargain at ?14.99 delivered from FFX..

The smaller Torx bits are super handy ...

https://www.ffx.co.uk/product/Get/Bahco-Xms21Sbit54-7314150337620-59-S54Bc-Colour-Coded-Bit-Set-54Pc

Sent from my SM-G998B using Tapatalk

 

[JamieMac]

Thumbs Up

 

[scooby]

bought 1 last month from there,they do some good deals through ebay

 

[stuartb]

I've bought quite a bit from FFX.. Good supplier and quick delivery..

Sent from my SM-G998B using Tapatalk

 

[alex]

How do Bahco rate say compared to Teng for tools?

 

[stuartb]

Pretty decent stuff Alex, Versus Teng I'm not sure, but for the home mech their stuff is ideal.. the 1/2" drive set they do is excellent VFM and an absolutely solid bit of kit...

https://www.halfords.com/tools/hand-tools/socket-sets/bahco-1/2in-drive-socket-set-454134.html

Sent from my SM-G998B using Tapatalk

 

[stuartb]

Here's how not to pack a set of plugs.. sloppy as ****, came in a plastic bag with a bit of bog roll inner shoved in.. typical don't give a **** ebay seller..

My coil puller and air filter arrived too..all well packed.

Sent from my SM-G998B using Tapatalk

 

[scooby]

How do Bahco rate say compared to Teng for tools?

i've only a few little bits of Bahco but seem good so far,i've quite a lot of teng stuff,my original ratchet/socket set from 20yrs ago is still going strong!! (and,not lost anything out of it ).

i've also got a couple of little socket sets/driver sets from bluespot,i know it's chinese imported stuff but is actually not bad,plus it has a lifetime gaurantee.i didn't buy these though,got given to try out as my mate owns the company (not plugging it,just giving my opinion).Teng is still my goto for bigger kit though.

 

[stuartb]

When I chucked the tools in 1991 I sold everything..all Snap On and Blue Point gear in a 9 drawer roll cab, thinking I'll never touch another tool again..EVER...

The Bahco stuff does just fine for me that 1/2" drive set is cracking for under 50 quid it offers a lot for the home mech.. I've a couple of Bahco shifters too, the gear I've got is a real mixed bag.. Wurth make some great quality tools too btw l remembering the forum discount !

I remember the very first purchase I made off Colin Spy our local Snap On guy in May 1979... OEXM 13 which was a 13 mil Combi spanner, it cost ?5.00 I used to stare at it lol.. that was the slippery slope..

Sent from my SM-G998B using Tapatalk

 

[stuartb]

This is a lifesaver, you'd have a hard job pulling those coil packs without it..

Sent from my SM-G998B using Tapatalk