- Joined
- Aug 25, 2022
- Messages
- 130
- Reaction score
- 5
Need some help with my Gen3 racebike.
Had a low side in the last round of NLR championship last year and only getting around to rebuilding the bike now.
Most of the damage was superficial but since trying to start the bike, I’m getting a CANBUS error on the dash.
I’m going to take a closer look at the plugs on the back of the display as the instrument bracket snapped in the crash and may have snagged a wire.
I have a GS911 which I main use for basic fault code reading, gearbox and throttle learning.
I’m not an expert on the software but will it provide any useful information to understand which wires may be broken?
Had a low side in the last round of NLR championship last year and only getting around to rebuilding the bike now.
Most of the damage was superficial but since trying to start the bike, I’m getting a CANBUS error on the dash.
I’m going to take a closer look at the plugs on the back of the display as the instrument bracket snapped in the crash and may have snagged a wire.
I have a GS911 which I main use for basic fault code reading, gearbox and throttle learning.
I’m not an expert on the software but will it provide any useful information to understand which wires may be broken?
