ABS/DTC Light prob

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Johnboy

Well-known member
Joined
Jan 15, 2012
Messages
376
Reaction score
0
Location
East Yorkshire
Hi all not posted in quite a while so hope all ok. To try to cut a long story short.... Dropped the wheels today to get new rubber, put them back in and reattached the sensor on the front wheel. Prob now is that the flashing abs/dtc lights won't now go out after I pull away. I've taken it back out & all looks ok. The book says that this means that the self diagnosis hasn't completed but both are working, im off to Scotland tomorrow and really don't want the dash flashing it's arse off for a week! Anyone know how to reset it at all please?
Cheers
 
Have you got the slick chip fitted? If the slick chip is not in it automatically puts all the abs and dtc back on after start up. I recently did a tyre change and left the sensor on the fork leg refitted and had no problem. Is the sensor to far from the ABS ring?
 
Yep got the slick chip, have taken the sensor off again then back in, it's done up pretty tight ( as it was ) so can't fathom it :-(
 
have you measured the distance of the sensor to the ring? if it is not close enough it wont read the ring correctly. do you need the distance measuring?
Also try it without the slick chip.
 
Cheers mate off away in the morning so will have to put up with it for the next few days. Will give u a shout if needed, thanks again
 
Back
Top