2011 high speed brake Judder!

[bananaman]

Can't fault my discs, 14000mls now, using ebc hh, still good breaking hard from 150+

 

[Bladeboy]

Check that all the bolts holding the discs to the wheel are correctly torqued down. On my mates s thou some of the disc bolts had worked themselves lose which caused an issue.

 

[timmo]

Fortunately your discs float, as they are supposed to.

yeah its not my first bike with brembos ,ive had a few,and i know the difference between radial movement
and axial float,ive never seen any brake discs anywhere that can be moved raidially,which i why i asked .
if you can confirm you have this on your bike i stand corrected.

 

[soofsayer]

Hoping to ressurect this thread as I found at Cadwell yesterday I was getting a lot of judder on hard front braking into park corner from 130+ (dunno, wasnt looking). Seemed to be worse after running a few laps. Is the problem the heat building up in the pads and not dispersing. Braking hard for a couple of seconds is fine, its when the braking zone is long and sustained the judder comes in.

007 did you sort this out?

 

[007neil]

mine turned out to be more preload on the fork springs, well stronger forks springs..

 

[bananaman]

mine turned out to be more preload on the fork springs, well stronger forks springs..

Don't understand this? Are you saying that increasing the preload ironed out yr brake judder?