Recent content by sockets

Can you send me your e-mail please - can't seem to post photos on here? Cheers

Yep - mines is the same and makes no difference at all. It's not like they're going anywhere are held in with the sprocket carrier anyway. Not worth a trip to dealer unless you have it booked in for something else anyway IMAO?!

Yes I have heard that but trying to get hold of them is difficult probably for that very reason!����

Thanks again Alex - I will try and send you a photo later to see if you can ascertain whether or not it is hot or cold tear?! Will be interesting to get some sort of feedback from Tim at Lind Motorrad about the fork seals saga. I have dealt with them many times and although not cheap I don't...

Many thanks - that seems to make sense now . So basically with hotter temps in Spain it should be easier to keep heat in it? What about pressures - if it's under inflated would it tear?

Mine was slightly worse and I could feel a hair line score on the fork leg inner when I ran my thumbnail across it. Asked Darren at MCT about it and he didn't mention anything about grease?! Took the fork out(RHS) and MCT put new seal in it and polished out scoring for ?100. He said it would...

Hi Chaps - any advice would be great please? Did a track day at Donington on Monday with new set of tyres on and they seemed to be wearing nice and evenly until the last session. My bike has been set up for me at MCT and the temperature on the day was 15-17 degrees, dry track for the most part...

Re: Track/race fairings, fibre glass Thanks for all your advice chaps - much appreciated!

Looking to buy a complete set although I already have an Imberger carbon belly pan. Not looking for cheap stuff just good quality that fits well and can be painted. CRC seem to be the best out there but very expensive. Anyone else tried any other fibre glass sets and do they all come with...

Hi there, Thanks for your response and apologies for not getting back sooner. I have mine fitted now and you're right about that you would hardly notice the difference to look at them Looking forward to doing some longer journeys but have noticed that riding position is more agreeable to me and...

Hi there, Anyone tried helibars yet? Got a set and will fit them over the winter for something to do!

Yes the pazzos will fit - you need to push the bush out of one of the standard levers though.

Hi there, Any suggestions for tailpack luggage for 2015 model. I have the OE BMW tailpack which I had on my 2012 model and fitted really well (not waterproof) but doesn't fit 2015 properly! I have also noticed that 2015 model has 2 less luggage straps on underside of rear seat. Any suggestions...

Hi there, Any suggestions where to take front caliper to get brembo mono bloc caliper repaired? Seal kit and labour? Cheers

Thanks Cally, I will give it a go. I think it may have been me who said pazzos dont fit only because of a bush that needed to be pushed out of the OE lever. Have since done that and pazzos fit fine now! Cheers Al