stuartb
Well-known member
Very little room for anything other than an accurate fit, the flanges and retaining springs are a bit of a faff. On the middle cylinders I find joining a couple of cable ties and using them in a link, hook round spring and pull down between the headers is a good way to attach them to the respective catches on the headers.
Just a bit disappointed there wasn't a pair of 02 sensor reducers included, system fitted great but a soft mallet and some WD makes the slip joints easier to fully engage, worthwhile marking with an inky so you know how far you've drifted the joints in...fitted the full system dry such was the quality of material and accuracy of the parts.
A reported 100db with and 105db without the baffle which covers all UK tracks when fitted... that said I'll believe 100db when I see it or hear it for that matter, could be just sales pitch..which I fell for of course [emoji849]...
Nipped flange nuts up, and I'll give the rest a once over tomorrow and stick the bodywork on.
Pulled the servo and cables, utilised the Servo bracket to mount the eliminator, just need to check the swing arm doesn't foul where I've mounted it. Had to carefully drill another mounting hole in the CF hanger for a better alignment of the can.
The weight difference is amazing.
Sent from my SM-G998B using Tapatalk
Just a bit disappointed there wasn't a pair of 02 sensor reducers included, system fitted great but a soft mallet and some WD makes the slip joints easier to fully engage, worthwhile marking with an inky so you know how far you've drifted the joints in...fitted the full system dry such was the quality of material and accuracy of the parts.
A reported 100db with and 105db without the baffle which covers all UK tracks when fitted... that said I'll believe 100db when I see it or hear it for that matter, could be just sales pitch..which I fell for of course [emoji849]...
Nipped flange nuts up, and I'll give the rest a once over tomorrow and stick the bodywork on.
Pulled the servo and cables, utilised the Servo bracket to mount the eliminator, just need to check the swing arm doesn't foul where I've mounted it. Had to carefully drill another mounting hole in the CF hanger for a better alignment of the can.
The weight difference is amazing.
Sent from my SM-G998B using Tapatalk
