Unidentified wire under the seat

[lightning_bob]

Under the seat there?s a wire with a ring terminal that?s not connected.
i traced it through the left side of the bike to a plug at the front as shown in the picture.
does anybody know what this could be for please

 

[MrSmooth]

The plug shown with the blue and yellow wires?

The Alpha Racing 2D potentiometer plugs into a similar connector around that same area that has a blank black cap on it as fitted from the factory - the 2D potentiometer hardware is attached to the outside front left fork measuring the rise and fall of the fork leg and plugs into a very similar plug (you remove the blanking cap shown) going into the wiring loom and separates compression and rebound on the front forks fitted with DTC.

Fingers crossed that I am correct

 

[lightning_bob]

No it?s attached to the white male plug that plugs into the black female connector

 

[scooby]

the 2 empty plugs at the front end are for the 2d data trigger (either gps or i/r) and the 2d suspension pot.the pot doesn't have a ring connector, cant rememebr about the lap timer without lookign art my bike

 

[lightning_bob]

So to be clear the black wire I?m holding on my finger comes from under the seat and has a ring terminal on the underseat end.
it connects into the white male plug, this connects into the black male plug