Stupidly undid the left fork clamp

[lllN30lll]

Yup, I didn't check the service manual, thought it would be the same method as my gsxr but nooooo, the left leg controls how inline the wheel is with the ABS sensor lol. I set it in a random place and now the bike wobbles all over the shop when I brake.

Can somebody measure how far into the fork leg their threaded spacer is please

Thankyou.

 

[lllN30lll]

actually, how close should the ABS ring be to the sensor?

 

[Niven770]

I did the same and I just tightened the spindle up before I did the clamps. Tightened the clamp on the left side, torqued up then tightened the clamp on the right side. No problems.
From what I believe you are supposed to do this then bounce up and down on the front suspension without using the front brake, then tighten the clamps.

i.e. my "adjustable spacer" is fully home.

Davy

 

[lllN30lll]

I didn't read a word of that mate, I'm still staring at your avatar.

 

[lllN30lll]

Well, turns out I did everything right, took it the bike shop and he double checked, but it on the brake test drum and the brakes are showing fluctuations.

The galfers I got from a member on here are warped

 

[turtle]

if you paid with paypal bud ya should be ok

 

[lllN30lll]

I've lost his number but I've PM'd him mate.

 

[turtle]

I've lost his number but I've PM'd him mate.

If you pm me bud I will see if ive got it bud