Cover ABS/DTC modulator

[bmwbadboy]

I bought this cover a while ago for Gen3 and never really figured out how to install it.

Asking collective mind to help and explain me.

https://shop.alpharacing.com/shop/i...1&products_id=15226&cPath=393_1270_1287_1291&

ABS pump looks like this. I can't figure out what exactly needs to be covered by the cover. Do I just unscrew the grey part and put the cover instead of it ?

 

[scooby]

from memory,it's just a blanking plug for the pump,electronics still need to be plugged in to stop faults(or just remove that aswell,but will get ABS fault on dash(i think),but just remove the ABS pump and fit the blanking plate,it just makes a bit of space+weight saving.

 

[bmwbadboy]

from memory,it's just a blanking plug for the pump,electronics still need to be plugged in to stop faults(or just remove that aswell,but will get ABS fault on dash(i think),but just remove the ABS pump and fit the blanking plate,it just makes a bit of space+weight saving.

So just remove this pump and put a cover instead ?

 

[fast_ryan]

Cover ABS/DTC Modulator

You should just be able to remove the ABS Pump and then install the alpha Racing cover in its place.

 

[Gixermogs]

https://youtu.be/QKXjjc-KsYQ

youtube video installation should help mate

 

[bmwbadboy]

https://youtu.be/QKXjjc-KsYQ

youtube video installation should help mate

Unfortunately his is Gen2, mine is Gen3. There is no eletric plug for Gen3 so that black part must stay on the bike

 

[scooby]

So just remove this pump and put a cover instead ?

yep.