Search results

Go get the thing flashed just like everone ese, problem solved.....It wasn't easy for me to flash my $41k 2024 m1000rr. especially with a $15k motor.....BUT, MOST bikes are absolutely fine. Get a brentune stage 1 flash on the thing, best money you'll ever spend. Bike will come alive. Did you not...

The only current front stand i have is the pitbull one that goes under the fork lowers and raises the front tire off of ground about 2-3 inches....i need the one that goes between the top of front fender and in back of lights kind of ? in that space (dont know what the location/part is called)

Went for a long ride today through canyons and really analyzed handling on m1000. I lack confidence on 'turn in' on sharp corners.....long sweeping corners, not to much of a problem.....but its seems like the front doesn't want to turn in that well. I did lower the eccentric rear strut to -2. It...

Is the chain length on 2024 m1000rr 120 links as well? Going to a 520 conversion kit, DID chain. Should i order 120 links?

Yes! Thats exactly what ive heard, the stock suspension is rubbish, and is meant to be replaced with something good (which IMO the bike should of came with) however, yes, im going the full ohlins route regardless. Im slowly finding out that this suspension is garbage, Im going to try and lower...

at 19:07 he talks about the pegs..... They DO NOT sell the OEM pegs separately that come with the GIlles OEM rearsets.....VERY STUPID......you have to pay $800 for a whole new side. lol. Theres a video of this same guy showing his angst towards how they dont sell the OEM pegs alone. I posted...

Ok i see. Yes i have a BT handheld loaded with stage one flash for m1k, but have not flashed it yet for a few reasons. 1. waiting for go pro chin mount for helmet to do before and after video of flash, going to start vlogging. 2.Would like to wait until at least 2500 miles in case any...

Ya the m1k suspension a way harder then the s1k....im 218 with gear and STILL had to take a lot of rear preload out. The m1k comes with a 100nm rear spring, which is crazzy. the s1k has a 60nm rear spring, so its almost double. BMW made the m1k for mainly track so they were right in thinking...

Oh wow very good to know. Did you think the front was a little to high from what you were comfortable with? Im going from a '21 K67 M, (20k miles) to this new m1k and im trying to get the front and rear more like my K67. On m1k the rear felt way to jacked up at first. I did remove the OEM seat...

On the 23-24 m1000rr?

Just lower or raise your eccentric strut. Dont worry or do anything to swingarm pivot at this point.....when i bought my '24 m1000rr, the rear felt way to jacked up....i ONLY adjusted the rear eccentric strut link and its almost perfect now. Its all in your manual.

Thank you but i bought a used one with a torn up seat cover off of ebay for 50 bucks....i just needed the platform because i installed this seat cover on the '24 m1000rr, which IMO is the BEST looking one out there right...

Yes Alpha racing has multiple triple clamps that fit fgrs they have the sbk one which is like $3,500 and then they have a cheaper one that basically does the same function for like 1600. So that red kill switch that you send me the link to is basically plug and play? So what I could do is...

Thinking about running full top of line ohlins..... So in order to run Ohlins front FGR 250 or 300. An entire new yoke is needed as these forks have a different diameter tube from the plug and play Ohlins FGRT 232. No one currently makes a yoke with a top triple that has the hole to mount the...

YES! Thats what i did yesterday, I took 2 turns of preload out of the front and what a difference! I think im getting closer and closer to how i want it to handle. Still some ways to go though. Yea thats another thing is im so used to pirelli diablo supercorsa.....the '24 m1000rr came OEM with...

Yeah I've never raised Forks or lowered any of my bikes and haven't really given it much thought but I've seen bikes lowered with the fork tubes sticking out of the triple clamps depending on how much it's lowered. Raising Fork basically just means lowering the yoke right? LOL I feel so silly...

https://www.ktechsuspensionusa.com/part-finder?find=BMW_M1000RR_2024https://www.ktechsuspensionusa.com/part-finder?find=BMW_M1000RR_2024 Yeah that's exactly what I thought about the hundred newton-meter rear spring. That's almost double as the k67. I have probably five turns of preload in the...

Just obtained 2024 m1000rr (K66). Still have my 2021 s1000rr M sport (k67) with 20k miles. Im so used to, and comfortable with my K 67. When trying to get comfortable on my K66, the rear felt to jacked up for my liking, The rear eccentric came 1- from factory, swingarm pivot was set to 5 dots...

When i got my 2024 m1000rr, i felt to much antisquat, the rear felt jacked up compared to my 2021 K67 m sport in which i had 20k miles on. I wanted the M1000rr to feel more like my k 67. The eccentric came -1 from the factory, swingarm pivot at 5 dots. I adjust ONLY the eccentric so the rear...