Recent content by fmo

I checked a random fast lap from my local track, max front brake pressure 10.7 bar on standard brakes. Sent fra min SM-G970F via Tapatalk

There is some sort of guide/support on the side of the male connector also, so I am sure that with some care when connecting it will be fine. Hopefully this will not be unplugged on a regular basis[emoji1696] Sent fra min SM-G970F via Tapatalk

Correct Alex, it is just a question of removing the tab. I got the choice of returning it (free of charge if course) so Alpha could do it or fix it myself. I will do it myself[emoji106] Sent fra min SM-G970F via Tapatalk

Solved. There has been a batch with wrong connectors from the factory. Sent fra min SM-G970F via Tapatalk

The numbers on plastic bag and receipt is correct for K67, but of course there could have been some mix up at Alpha or producer Lohmann. I have emailed them but dont expect to hear from them in the weekend. Sent fra min SM-G970F via Tapatalk

In my garage now installing Alpha fast shift sensor, but the connecting plug wont fit. The tab is in different places OEM and Alpha (see picture). Anyone else seen this or am I missing something?, Sent fra min SM-G970F via Tapatalk

Graph looks much better now when I followed your description and changed plotting scale (default setting was max 1/ min -1). Fork travel still not correct with only 51 mm in total but I am getting closer to something ;-) Sent fra min SM-G970F via Tapatalk

Thanks again! Probably user error... I did nothing of this, just plugged in and expected it to work :-) Now I have a lot of info to work with. Sent fra min SM-G970F via Tapatalk

Thanks for very good input, I haven't access to the bike right now but will check the sensor as soon as I can. 1. How do you check/change damper sample rate on the AIM Solo? 2. Is the damper calibration done with no load on the wheels (central stand or resting on footpegs) or with wheels on the...

Here is data from Solo2 DL. Strange front damper readings from -10 to 41 mm, very on and off. Could it be a faulty sensor? I purchased it used. Sorry for bad picture from laptop screen. Sent fra min SM-G970F via Tapatalk

Thank you very much! I already have the front potentiometer and thought that I then could get data through my AIM Solo2 DL, but I cant get any useful readings from that. Running K-Tech front and rear. Sent fra min SM-G970F via Tapatalk

What is the easiest (most economical) way to get suspension data from K67 with standard wiring loom (not M-RCK)? Sent fra min SM-G970F via Tapatalk

I have the understanding that converting K46 front wheel to the gen 4 is possible wihout too much involved? Read somewhere that machining down 1,5 mm each side of the hub/brake disc mount is the solution... What about sensor ring? Will this work regardless of wheel type, i.e OEM forged, OZ, PVM...

Thanks [emoji4] Sent fra min SM-G970F via Tapatalk

Can someone confirm that the sprocket carrier is the same for K67 OEM forged and carbon wheels? Frode Sent fra min SM-G970F via Tapatalk