Changed pads, changed fluid… Now i HAVE a JUDDER!!!!! So many problems… never had any of these issues with my R1. What should I do now? Im going take pads out and put them back in. See if it cures the judder. My friend said that I should loosen the pinch bolts then push down on the front forks...
They used a machine… Looked a bit like a spray painting gun. They sucked and filled and sucked and filled and sucked…
Cleaned calipers too… Pads still binding. Im frustrated . The pads were slightly low so im hoping new pads will stop the binding… If not… I dont know what Im going to do.
2012 model , 10000 miles on clock. bmw said they probably need cleaning...
when you have the bike on a front paddock stand the wheel spins but stops very quickly...
Ok, my front brakes are binding . I took the calipers off , removed pads the gave them a clean with a tooth brush . Still binding… What else can i/should i try.
What step by step method do you guys recommend ?
Thanks guys.
this is what they said to me…
" The bike must have been cleaned with a cleaning product that wasnt used properly . The product is ok to use when the bike is wet but not when dry"
Now… they couldnt tell me what product. And they concluded this from a visual point of view. But the screen is...
going to put some dot 5.1 (not sure if thats standard). I can bleed brakes myself but im concerned that the ABS will need doing to so may have to go to a specialist...
I need to change my brake fluid on my s1000. Is it a brake fluid change like any other or does the abs complicate things?
also… what fluid do you guys use?