Recent content by Bigbaz

did they fit well mate?

I've just bought a complete set from Racefoxx in Germany, off the old 'Fleabay'....very nice I'll let you know how it fits, mind you all their other parts have been quality and fitted well so no reason why this wouldn't fit ok too.

yep I've had one of these, bought it second hand and cost me ?160!!!....not worth it second hand let alone the new price, as didn't align to my liking...sold it for more than a bought it for, which was a result.....no got a hybrid system, 2012 headers graphed with akky link pipe and Ti race can...

I'm getting about 100 miles on 'slick' mode before light comes on but have seen as little as 85 when cranking it on a bit, I've also tried to 'brim' the tank on filling but only really got about 15ltrs into it when refuelling. I'm off to France in a couple of weeks so I'll see what I get then on...

No I think it's for the aftermarket linkage or even a engine mount hole for assembly but I see what he's saying, with a long enough bolt you can bolt through the fairing into the hole, however I think it's a large bolt hole can't remember exactly.

good luck mate... I'd get a alloy bracket made up, paint it black no one will really notice it if you do a good job, if you didn't want to go down the more expensive route of buying a new linkage etc...which I understand....good luck

Or you could buy the HP gear linkage then it would mount spot on and sturdy and I think you can run either 'road or 'race' shift pattern, I think the HP Reverse kit complete costs ?190 from BMW, made by Gilles too so quality but not sure they sell it through themselves mind. It can run with OEM...

yep that's had the section cut out when running a reverse linkage as the hole in the bellypan would match up to the hole on the linkage mounting arm , like in my photo above, failing that you can make a small 'dog legged' bracket from alloy that will mount of the OEM hole onto the bellypan...

was your belly pan brand new or second hand?...if second hand it may have been cut back to accommodate a different gear linkage like the one I'm running?

A couple of pictures explaining how I mounted the Carbon king belly pan I have on my 2011 RR

I've got a Carbon King full length bellypan, it too mounts off the two side fairing bolt holes. I gave then mounted it off the original bolt hole near the R/h side rear set as the OEM fairing does, but I of if need to put a small peice of brake hose behind the fairing joke to support & also...

Old problem showed its face again...well its happened again, left hand coil popped off, noticed this time that its broken lip around top of coil so got another to fit tonight, however I've also noticed what's seem to be engine oil on the coil itself....wondering whether the cover gasket maybe...

I have Zero Gravity DB & being 6'6" tall its the best I've used so far for wind deflection and reduced buffeting at speed...

Now that's flash!......like it!

update....took the front section of the air box off as this gave me a viewing of all 4 coils and notice left hand coil was not attached to plug...not sure why this had pooped off my only thoughts are that when I took the rad off to fit new headers I seem to remember moving the coil around...