Traction and ABS light on!

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Felix

Well-known member
Joined
Oct 9, 2016
Messages
895
Reaction score
0
Location
UK
Hi guys,

Just got my bike dyno'd with my friend for the fun of it. And after the dyno my traction and ABS light are stuck on, Not flashing and not going off when I ride, Spoke to the dyno guy and he said it cause the front wheel wasnt moving which I think is BS. How do I fix this?

Thank you.
 
Have you checked if they have been turned off to do the runs? Solid light means they are off.
 
Last edited:
Have you checked if they have been turned off to do the runs? Solid light means they are off.

It was on Slick mode doesnt it have to be on user to turn off? If so how do I turn back on?
 
Have a look in the manual. It's described, you need to press and hold the tc button etc. easy.
 
Glad all sorted, as Soof says it's nothing to worry about it's just in order to run a bike on a Dyno the TC and ABS need to be disabled.

Also, the bike sometimes needs to be in motion to turn the ABS/TC back on.

Can you upload your Dyno graphs Ben?

Thanks
 
Dyno I have 193BHP @ Rear but the other place said it's running rich at the top, Just wondering if I should get it mapped there as the dyno bloke said "He is the dogs bollocks"
 
Ben did you have a PCV installed and mapped at HM or did they just install the exhaust for you and then check fuelling on their dyno?

My bike ran rich at the top end with that exhaust and stock O2 sensor installed
 
Dyno

Every Dyno will read differently and HM Racing are well renowned so you would just be wasting your money.
 
Well this other dyno place said my bike has 184BHP @ rear and said its running rich at high revs so I'm a bit worried :(?
 
Last edited:
Dyno

I could take my BMW to four different Dynos and get four very different results. How the bike is tuned will also vary as different tuners will use different techniques depending on what you request them to do. I personally would not worry at all. That and tuners will inevitably be touting for business and will always say that they can do a better job then anyone else. Like I said just save your money and enjoy the bike.
 

Latest posts

Back
Top