positioner unit exhaust flap

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Viktorijoski

Member
Joined
Nov 3, 2024
Messages
5
Reaction score
0
Location
Macedonia
Hi there! New with this brand, i only have this bike for few months and i bought it used (s1000rr 2012). The bike have cat removed and it has akrapovic shortie connected with headers via dominator connector pipe. Today i noticed three beeps when i turn off the ignition key and some sound under the seat, right where the rear shock is when key is turned on. After some time searching on the net i found out that that part its called positioner unit exhaust flap. I didnt noticed this sound till today. Heres short youtube video clip:

Three beeps when the ignition key is turned off disapeared but the sound of this unit continued to appear. Is this unit can be disabled since till today i never heard this unit working. Thank you!
 
You can remove/disconnect the servo and connect a servo buddy/healer to prevent getting error code.
 
You can remove/disconnect the servo and connect a servo buddy/healer to prevent getting error code.
Thank you!Can I just disconnect it without removing it and connect a servo buddy? Also any idea why this wasn't active till now? Im owning the bige for few months and ive never heard it functioning :/
 
Thank you!Can I just disconnect it without removing it and connect a servo buddy? Also any idea why this wasn't active till now? Im owning the bige for few months and ive never heard it functioning :/
Yes you can.
Good question. Have you had a firmware update/used a GS911 or reset the ecu?
 
No nothing updated/reseted. Actually couple of times start button didn’t functioned after previously washing the bike so i thought i’d check if modes button work so i scrolled couple of times through the modes and left it back on the mode im driving atm. After i turned off the key i heard 3 beeps where the ignition lock is placed and heard that servo sound under the seat
 
Last edited:
I would start with reading what fault codes you have. Then reset and see what codes are still there.
 

Latest posts

Back
Top