Alex - 2017 S1000RR - Grey/Black

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I have this to try in future, strap didn't quite reach hence its not on today.
Got it from Simon at Powertech in the idea I wanted a can to pass in spa
7229136286579b6be0f80bc3e133eaee.jpg


- Alex
 
Longer the can, the quieter it'll be. After that it's a conical internal perforated baffle, honeycomb end to baffle alla MotoGP, then the dreaded baffle which screws the power on my bike.
 
All ready for Jerez.

Recently changed the oil. Put in 10w40 as its running on track in the warm, Castrol Power 1.

I bought a BMW Filter and a HiFlo to compare. Decided to fit the BMW part.

Nothing of note on the sump plug, those bits are frickin tiny.

Oil out was dirty but free of bits.

Taking V02's again, brand new set fitted to the HP wheels. New 3LC rear with scrubbed front on the Titax blue wheels. Taking both sets of wheels as I'm not 100% sure the discs on the HP wheels were ok (free'd the bobbins off but have no opportunity to test). Taking the spare wheels and discs for an extra £10 is far cheaper than replacement discs.
Talking of brakes, fitted the Z04's for this trip too...
7050b9ef5aa4430c9da336ed2d019ea3.jpg


258fa9c080529207237c027d1639d356.jpg


41ca8eae0de4c5bbdb98453f03563c11.jpg


- Alex
 
Last edited:
Swarf looks ok on that magnetic sump plug.. I done an oil change on my 10R rears ago and there was a pretty sizeable chunck of toothed gear attached to the magnet...

Those hex heads on the oil filters are excellent for removal...


Sent from my SM-G975F using Tapatalk
 
Last edited:
New toy.
Sourced from FB 2nd hand. If it works its a decent saving over new to make it man maths compliant.

Lohmann Fast Shift Sensor
def6e3d8781e35fd1440e0e668e41d23.jpg



5c53a89b6dea462797df0db43032aeb0.jpg


- Alex
 
Last edited:
Fitted the Lohmann got to clear the adaptions and sync it sometime.

36a37bb68ccfd6d6f349c4b0a865aa77.jpg


d321fc5c0a9c37f6d85e0168450c7415.jpg


Also moved the pegs and shifter higher and back to see how the different position would work for me.

- Alex
 
Last edited:
Came back from Jerez with more brake dust than is healthy, everything down the clutch side was coated in orangy dust.

Looks like I have a binding/sticky brake pot...which is annoying as I have DLC coated ones from Alpha. Going to have to do a much better cleaning job :/

9319ea7251edef88baa9d9527093383d.jpg


7062506dc571b657e2bda40726030b6d.jpg


3d52bfd7ab80dbd682cd4b60f55580e2.jpg


653d46a864f8f9c7befd8fd033732e44.jpg


8ee78946caa25f9937e59a34a04f8f01.jpg


- Alex
 
Last edited:
Fitted the Lohmann got to clear the adaptions and sync it sometime.


Also moved the pegs and shifter higher and back to see how the different position would work for me.

- Alex

Nice! But are you sure it's not mounted upside down ?
 
I'd like some confirmation. Bought a Lohmann shifter second hand. I fitted it as it came, wrong way up at first till BBB corrected me. But now I looked again at the picture on the Alpha site and the picture of my install and I realise the electronic unit is upside down. The cable goes straight up on theirs but mine goes down and loops back. Also the label is facing the bike.

So I think it was assembled badly by the previous owner. Can someone confirm @scooby maybe?

I think I should pull it apart...

Alpha
c33a064a78f850b3547208c0eb402df5.jpg


Mine
7549a8eeba01f2ca17efaea872b27014.jpg


- Alex
 
Last edited:
alpha Racing / Lohmann Quickshifter

The cable normally comes out of the top of the unit and routes upwards avoiding the front sprocket area. There is also alpha Racing or Lohmann branding on the quickshifter that faces outwards. The alpha Racing instructions are fairly good so if you follow those then you should be ok.
 
Back
Top