Results 1 to 1 of 1

Thread: Fitting new screen 2015 S1000RR

  1. #1
    Forum Vendor GixxerChuck's Avatar
    Join Date
    Apr 2014
    S1KRR 2017 Black
    Thanked: 220

    Fitting new screen 2015 S1000RR

    Screen is a Puig double bubble dark smoke
    Easy job this one. M20 torx is only tool needed.
    First remove the 6 bolts (front 2 don't have to be removed but need loosening)
    Remove the screen by sliding it up and towards the back of the bike.
    The standard screen has 4 rubber bits that have a nut inside.

    Just push these out from the bottom (rotating can help)

    They then get put in the holes for the new screen

    Push the rubber bits in through the holes from the top of the screen

    Slide the new screen down and towards the front of the bike aligning the holes
    Screw the bolts loosely in until they grab in the nut

    You only need to finger tighten the bolts with the torx bit and the nuts will compress and seal the screen on

    Job done
    Last edited by GixxerChuck; 23rd June 2016 at 09:36 PM.
    It's not about how fast you go, it's about how you go fast!!
    2017 S1000RR Sport - Positive vibes bar ends, HP Rearsets, HP levers, LighTech chain adjusters, Evotech tail tidy, R&G crash bungs and cotton reels, Puig dark smoke double bubble screen, Stahlbus oil drain valve
    K8 GSXR750 - Yoshimura R55, de-cat headers, BST wheels, Ohlins TTx, Gilles rearsets, Pazzo shorties, Smoked double bubble, Stompgrips, R&G Bungs and engine sliders, R&G Tail tidy, K&N Airfilter, Brembo discs and pads, Hel braided lines, HIDS4U HID kit, Carbon look tank pad, clock surround and yoke protector, Stahlbus oil drain valve, Relentless decals, R1 throttle mod, suspension set up by MCT suspension, Bazzaz Zfi-tc TC and mode switch, Bazzaz autotune. 98k and counting
    IAM test passed
    IAM Masters test pass

  2. The Following User Says Thank You to GixxerChuck For This Useful Post:

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts