Tail Tidy

S1000RR  FORUM

Help Support S1000RR FORUM:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Broke it taking it apart but here is the hidden resistor on a nrc tail tidy number plate light loom
50264b1cf43934b6608a9a8df1d9bd85.jpg



Sent from my iPhone using Tapatalk
 
Excellent, so that's tiny jeez!...

I was going to try that single LED unit, but ended up out visiting my nephew after a cardio class then had to repay Saturday nights agreed debt [emoji97][emoji97][emoji97] to an ex of mine !

The worst part of these IKEA pieces are always those cheap shite die cast cams that lock the parts together..
9c35db96e833f5bb60e656f0d3e3093c.jpg
e72e8f6233cb766bc75f5f54f20cd105.jpg
0c13b49c106502a9a48ae45f7161ac37.jpg


Sent from my SM-G998B using Tapatalk
 
My hypothesis appears correct, tried a single pole LED, no warning on the dash... I'm as sure as can be that the triple LED drew too much juice and upset the canbus parameters..

Disappointingly the triple LED dash error remained when using my GS-911, so was unable to suppress the error which left no option other than to swap it out for a single unit.. also binned that ill fitting tail tidy.

Sent from my SM-G998B using Tapatalk
7454fd2a9a6e2d6764977ad19612729f.jpg
f3202d88b8b47d98e0eb03cccb963971.jpg
ecf3166e0c035c680719d6685be3a513.jpg
011e7f806a7afcad2041ce4806663a4c.jpg
32fdb620b310fd0b7d8aecdce5c1505d.jpg
c89390f62e7774ee66f3cfe761c1b895.jpg
 
Last edited:
Fitted a tail tidy a few months ago, however whilst riding the bike last week it threw up this error message on the dash for the first time.

Any idea what could have caused it ?
 
Re: Fault Dash Message

If you remove the OEM number plate carrier and/or the mirrors/indicators the bike will display an error message on the screen. The system will keep displaying the fault message until you reconnect the OEM plugs. You can suppress the warnings in the ?Racetrack Configuration? menu by deactivating the ?Lights Warning? function.
Does this reflect when you change to the evotech tail tidy as well or does the error never appear?

Sent from my SM-G986B using Tapatalk
 
Just had this error appear after having the Evotech tail tidy fitted for 8 months.

The rear number plate led light is now flickering, along with error message.

Anyone else encountered this problem with or without a tail tidy fitted on a gen4?
 
Just had this error appear after having the Evotech tail tidy fitted for 8 months.

The rear number plate led light is now flickering, along with error message.

Anyone else encountered this problem with or without a tail tidy fitted on a gen4?
Smells like a warranty claim, intermittent broken connection somewhere.

Sent from my SM-G986B using Tapatalk
 
Just had this error appear after having the Evotech tail tidy fitted for 8 months.

The rear number plate led light is now flickering, along with error message.

Anyone else encountered this problem with or without a tail tidy fitted on a gen4?
Checked the wiring loom? Someone in the states heat damaged their loom after fitting an NRC tailtidy.

Its not a warranty job if its a modified part.

Sent from my SM-G965F using Tapatalk
 
Checked the wiring loom? Someone in the states heat damaged their loom after fitting an NRC tailtidy.

Its not a warranty job if its a modified part.

Sent from my SM-G965F using Tapatalk

Just remembered that the Evotech tail tidy uses an evotech rear number plate led light rather than the original BMW one, I have just emailed Evotech to ask if they can send me a replacement led rear number plate light.
 
Never had a problem with my EvoTech which included the led as supplied. Just check connections thoroughly.
 
Stu, Just turn off the light error warning in the menu's like the Gen3? I haven't tried it on my new bike but it will be there. Or add a resistor to cure the problem, that's all it is. Measure the resistance of the original number light with a multimeter and order the equivalent one from Maplin's :victorious: (Sorry they went bust Grrr.) Order from ebay. J
 
Back
Top